日常通联和业余摆弄，楼主正处于A证考试刷题阶段，目前了解到标题两款型号，因设台位置长期处于山区（山区/城区7:3），故需求大功率设备(价格不能太高)，您更推荐哪款?还望讲解一二，请大腿不吝赐教!

啊对了，以上两款备选设备，是楼主浅薄的网上冲浪总结得来，如有价差不大且更具优势的设备型号还望老火腿指路~

可玩性上，泉盛 UV-K5 UV-K6 更好玩，价格便宜，80到90左右一台，随便玩，想一步到位的，或要上数字 C4FM中继的，上 yaesu ft5dr

@"YAOQI"#p28661 感谢回复，已经有一台UV5R老款5瓦机+钻石SRJ77，对最近新机的中文菜单、大功率和扫频功能比较感兴趣所以看到上面备选机型，您推荐的八重洲FT5DR确实非常棒，奈何我对搓衣板的恐惧实在无力下手呀~

其实 K6真心。。买个一步到位4M改装好的能有很多玩法。。还能打打卫星玩玩卫星APRS啥的

k6虽好，可是8600外观真的很对我胃口 ~~所以我买了k5和8800🤪~~

@"BG2EFX"#p28663 感谢回复，也在考虑泉盛UVK6猛男粉刷固件，但其5W的功率让我有些顾虑~

@"BG5VLI"#p28667 是的，8600外观确实不错，就是不知道除了外观在功能和通联质量上能不能撑得起他比k6贵的一百块差价

@"BG5VLI"#p28667 外观虽然对胃口，但是菜单和按键逻辑差异很大

5rh出了个pro，新增gps和aprs

@"Thunrest"#p28662 祝楼主玩得开心，哈哈😜

[Purchase Recommendations] BaoFeng UV5RH or Senhaix 8600PRO

Thunrest

BG0EQG Okay, I recently purchased a new Diamond SRJ77 antenna and am now back home. I'll connect it to my UV5R radio first to test its performance.

Thunrest

YAOQI Thank you for sharing. Would you recommend buying the official expansion version of UVK6? What are the main improvements gained from flashing the firmware?

YAOQI

Thunrest You can directly purchase the official, large-capacity version, which costs around 200 RMB. This offers a wider selection of firmware options for flashing, and to see how it improves things, please refer to the GitHub page.

https://github.com/losehu/uv-k5-firmware-custom

BH6BIQ

Thunrest Instead of buying a new K6, it's better to buy a K5 and some storage chips for around 20-30 yuan and have them professionally installed in your phone. You can get it done for over 100 yuan.

Thunrest

YAOQI Because I mostly use it in shallow mountains, I'm considering whether a more powerful version could be helpful.

YAOQI

Thunrest If you're at the top of a mountain, that would be ideal, as you could set up a repeater. Of course, obtaining a repeater license might not be possible, but you could still engage in weak-signal (SSB) operation.

Thunrest

BG4IJK Thank you for sharing. Since I have the necessary hardware at my location, and am considering setting up a repeater, I'm not sure where to start as a beginner (I'm lost).

Thunrest

BD7PPD-xiaohei-lv One of the main reasons I bought a new radio is because it has a Chinese menu and channel names (￣∇￣).

Thunrest

YAOQI Thank you, I will investigate further and see if it requires specific equipment to support this function.

Thunrest

BH6BIQ Thank you so much, senior! This operation seems quite complex for a beginner like me. While I can use software to achieve this, I need to learn more about the hardware first.

BG4IJK

Thunrest If you only need it temporarily, you don't have to buy a professional repeater, and you also can't obtain a license for a repeater. Consider the ZASTONE D9000 mobile repeater, which can also be licensed.

There are three key issues that need to be considered:

First, stand on a high vantage point and test the communication with a standard handheld radio. If it doesn't work, using a 50W car-mounted repeater or even a more professional repeater will only waste your money.
While a chassis is cheaper than a repeater, buying one complete set can still be expensive; you should budget around 2000 yuan.
A car-mounted repeater cannot be used for extended periods, and it must also be protected from malicious use, as this can easily damage it.

BH6BIQ

Thunrest It's not that bad; as for the hardware, I'm also a beginner, and I had the phone store solder it for me.

Thunrest

BG4IJK Thank you very much for your suggestions. I plan to go to the top of the mountain in the next few days to experiment with my 5R and see how it performs, and I've also been looking into the ZASTONE D9000 repeater solution. I recently saw a green box repeater from Dongge at around $2k online, but I don't know what its performance is like. Since I have a large area of land on a hillside that I can use freely, setting up a repeater there wouldn't be a problem.😝

YAOQI

Thunrest Please note: Don't just call it a "repeater." A repeater requires a license. Unlicensed, illegal repeaters should be investigated. For casual use, technical research, and testing connectivity, calling it a "repeater" is fine. The underlying principles and functions are essentially the same (and can be understood as two different terms).

Thunrest

YAOQI Noted, thank you for your guidance!

YAOQI

Thunrest No need to be polite, I'm also relatively new to radio, so let's discuss it together.

zw_apple

Using a high-power transmitter will only provide a slight advantage when transmitting to or receiving from a repeater, but the effect is minimal. After all, whether you can receive a signal depends on the signal strength and location of the transmitting station, not necessarily on whether your own equipment is high-powered. If you cannot receive a signal, you still cannot receive it, and it is better to think about how to increase your height or improve your antenna.

Thunrest

zw_apple Thanks for the reply! I'll try to find a suitable location. I've already purchased the Diamond SRJ77, but carrying an eight-element Yagi antenna is not feasible. Are there any other recommendations?

MelvinMei

Like the original poster, I'm also a beginner. Personally, I still prefer QuanSheng UVK6.

VR2WBZ

BG7RZ Mora GP338

BG7RZ

VR2WBZ 出！350包一套蓝板四滤主机原装天线typeC充电口新电池还有写频线，需要的话联系我

闽ICP备2021006864号-7

闽公网安备35020602002794号互联网举报中心

用户协议隐私政策社区规范积分规则中继规则转载须知
更新日志联系我们常见问题友情链接运营报告赞助

浩奇科技（厦门）有限公司

是无线电，把我们联系在一起