请问八重洲FT-DX10面板最右侧的两个旋钮，上面那个是能按下去的，机器也有反应，下面那个看说明书应该是按不下去的，但是按压还是会有轻微的咔哒声，而且几个旋钮感觉很容易上下左右晃动；各位的DX10有这种现象吗，想知道这样是不是正常情况

@"BG2EFX"#p24945 下面的，NOTCH那个

@"BG6HFD"#p24949 NOTCH CONT/APF? 那个旋钮是可以按的啊说明书有写

@"BG2EFX"#p24950 啊，真的能按么，看说明是上面两个按钮可以按下，没有说旋钮有按下功能吧；上面SHIFT旋钮按下是有提示音的，下面我看了下技术手册没有按键功能的样子，但感觉比其它三个小旋扭都松动，想看看这个松动是不是正常情况 [upl-image-preview url=https://storage.hamcq.cn/2024-07-26/1722011240-627824-qq20240727002450.png]

等你发现大波轮不圆你会更难受

@"BI1JNP"#p24958 哈哈，如果是普遍存在现象的倒没什么了

@"Yuluoxk"#p24966 哦哦，那看来不是啥问题了，设计如此

大波轮中心是偏的，快速转它，眼睛在侧面看很明显，心里膈应的事是不又多了一个

@"BG2ELG"#p24983 确实，每次转波轮的时候看着很难受 ~~所以调频率我都转外圈那个~~

I would like to ask for advice from anyone who owns an FT-DX10 radio.

BG7NOD

If you're looking for quality control features, take a look at the FT-DX101.

BI1RRE

I opened the box in the middle of the day and didn't read the instructions. I pressed all the knobs and buttons, but only Func seemed to work.😄

BG6HFD

BI1RRE The middle knob between "SHIFT WIDTH" in the upper right corner can also be pressed, and its function is to long-press to clear the setting of a specific value.
Then you can check the screen for any dead pixels or bright spots. I'd like to see if this particular unit has them, or if it's a common issue.

BG6HFD

BH9CA Initially, when turning with one side, there would be a slight offset. And, DX10 has a mechanism for adjusting the tension of the cam; when this is adjusted, the gap inside increases, and the offset also increases.
Are you also using a DX10 card? Please carefully examine the screen for any dead pixels or bright spots. If there are a few, I would like to check if it's an isolated case.😂

BI1RRE

BG6HFD Okay, I'll purchase one along with another ham and provide you with an update. If all three arrive as expected, that should be it. My two machines are the CN version from October-November 2023. I will check them tonight.

BG6HFD

BI1RRE Okay, thank you.

BG7NOD

I got an FT-710, and I noticed that the knob in the upper left corner was moving much more erratically, almost like a joystick on a game controller.😂

Moonlight

This is what makes "Made in Japan" so appealing (under heavy fog).

BD3PZF

BG6HFD I encourage more friends to share their experiences using it. I found that there are too many buttons, and I'm having trouble figuring out how to use them.

BG5BLI

That knob can be pressed, and the one in the upper right corner is for something like a notch or width adjustment. I've used it for over a year and haven't needed this feature yet.😂

« 上一页

闽ICP备2021006864号-7

闽公网安备35020602002794号互联网举报中心

用户协议隐私政策社区规范积分规则中继规则转载须知
更新日志联系我们常见问题友情链接运营报告赞助

浩奇科技（厦门）有限公司

是无线电，把我们联系在一起