前几个月，我曾在 https://forum.hamcq.cn/d/16 文章里提到过，需要一个简单的账号认证体系，目前做了以下工作： 2022-12-01 上线了手机号认证：https://forum.hamcq.cn/d/87 2022-12-11 上线了业余无线电台操作证书认证、无线电台执照认证： * 操作证认证，需要使用「真实姓名+身份证」，有几点需要说明： * 增强站内实名制要求。数据会定期请求来自「中国银联」或「腾讯云」提供的三要素认证服务。 * 认证由程序接口请求自动执行完成，不会有人为介入。 * 如果有操作证类别更新，无需二次输入数据，可以方便的进行请求更新。 * 所有数据由 AES 加密存储。 * 方便校验电台执照真实性。 * 其它功能扩展性基础支撑。 * 执照认证： * 目前由人工进行多因素审核 * 认证通过后，会从服务器删除对应材料文件（执照照片） * 执照认证通过后，可以获得个人主页专属链接：[hamcq.cn/BG5UWQ](http://hamcq.cn/BG5UWQ) * 全站执照查询：https://forum.hamcq.cn/verified FCC 执照认证可前往 >>> https://forum.hamcq.cn/d/126 由于开发精力有限，目前仅提供认证后的一些标识展示，其它功能后续陆续迭代，欢迎各位体验。 [upl-image-preview url=https://storage.hamcq.cn/2022-12-12/1670823840-884595-image.png] [upl-image-preview url=https://storage.hamcq.cn/2022-12-11/1670769460-450556-image.png] 顺便预告下个迭代：由 @"YofoaStudio"#7 提出的换卡平台有其它期待的功能，欢迎在评论区讨论~

操作证书认证完成后，无线电台执照认证无法上传图片，上传执照照片提示无权限。不知道是我这边操作有问题还是怎么回事。

@"BD8AGD"#p426 感谢你的反馈，目前已去除一处权限校验，方便的话再尝试一下，如果有其他报错可以截图粘贴到这里

@"BG5UWQ"#p427 已经可以正常上传照片及电台执照认证，谢谢！

怎么认证图片还有大小限制😂

@"pjwbb"#p445 是的，目前限制是单张图片为 10M

奇怪提示输入身份证？我输入身份证然后通知我审核不通过...输入操作证，提示身份证长度不对。所以是咋啦？

@"BA7MTH"#p507 刚发现问题了，已修复。证书查询接口那边更新了

@"BG5UWQ"#p509 看到日志，顺便 @"BI1NIZ"#164 ，方便重新提交下吗，不知道是不是身份证写错啦，获取不到对应的操作证信息

这两天刚刚下呼号的，V2上看到了站长的帖子。哈哈希望大家多多帮助。 ——BH4GAC

Operation Permit/License Verification has been launched on 2022-12-11

BG5UWQ

前几个月，我曾在 https://forum.hamcq.cn/d/16 文章里提到过，需要一个简单的账号认证体系，目前做了以下工作：

2022-12-01 上线了手机号认证：https://forum.hamcq.cn/d/87

2022-12-11 上线了业余无线电台操作证书认证、无线电台执照认证：

操作证认证，需要使用「真实姓名+身份证」，有几点需要说明：
- 增强站内实名制要求。数据会定期请求来自「中国银联」或「腾讯云」提供的三要素认证服务。
- 认证由程序接口请求自动执行完成，不会有人为介入。
- 如果有操作证类别更新，无需二次输入数据，可以方便的进行请求更新。
- 所有数据由 AES 加密存储。
- 方便校验电台执照真实性。
- 其它功能扩展性基础支撑。
执照认证：
- 目前由人工进行多因素审核
- 认证通过后，会从服务器删除对应材料文件（执照照片）
- 执照认证通过后，可以获得个人主页专属链接：hamcq.cn/BG5UWQ
- 全站执照查询：https://forum.hamcq.cn/verified

FCC 执照认证可前往 >>> https://forum.hamcq.cn/d/126

由于开发精力有限，目前仅提供认证后的一些标识展示，其它功能后续陆续迭代，欢迎各位体验。

顺便预告下个迭代：由 @YofoaStudio 提出的换卡平台

有其它期待的功能，欢迎在评论区讨论~

BD8AGD

After completing the certificate authentication, I am unable to upload images for the radio station license. When I try to upload a photo of the license, I receive an error message indicating that I do not have permission. I'm not sure if there is something wrong with my own operation or if it's due to some other issue.

BG5UWQ

BD8AGD Thank you for your feedback. We have removed one permission check to make it easier to try again. If you encounter any further errors, please provide screenshots and paste them here.

BD8AGD

BG5UWQ I can now successfully upload photos and radio license certificates. Thank you!

BI6OPR_loogarch

Looking forward to it; it's getting better and better.

pjwbb

What are the image size limitations for verification?😂

BG5UWQ

pjwbb Yes, currently the limit is 10MB per image.

BA7MTH

Strange – it's asking for my ID? I entered my ID, and then it told me that the verification failed… Then, when I tried to enter my operator's license, it said the ID length was incorrect. What's going on?

BG5UWQ

BA7MTH I just discovered the issue and have fixed it. The certificate query interface has been updated.

BG5UWQ

BG5UWQ After reviewing the logs, also... @BI1NIZ Could I please resubmit it? I'm not sure if I made a mistake when entering my ID, and I can't retrieve the corresponding operation certificate information.

BI1NIZ

BG5UWQ Haha, I just did a quick test of the functionality yesterday, and wrote it down casually. I'll submit it properly later.

BH4GAC

I just saw a post from my supervisor on V2 about this. Haha, I hope everyone can help out.

– BH4GAC

BG5UWQ

BH4GAC I was surprised to see a familiar face from V again.😁We warmly welcome you.👏

I received your email and have replied via QQ Mail. I noticed that it was sent from a Gmail address, so I'm not sure if it will be received properly.

BH4GAC

BG5UWQ Hello_{I have received it! Thank you for your reply, and I have also applied to add your contact information.}

BI6OPR_loogarch

So, how do I update after upgrading?

Oh, I see, I clicked "Request Update."

BG5UWQ

BI6OPR_loogarch You can operate it directly.

BI6OPR_loogarch

BG5UWQ Okay, I clicked "Request Update".

BG5UWQ

BI6OPR_loogarch Haven't you already completed the operation certificate verification on your end?👀If there are new Class B devices, it may take some time before they can be operated.

BI6OPR_loogarch

BG5UWQ Yeah, A had its certification validated a few days ago, and B also got their operating license recently. Haha.

BG5UWQ The message indicates: Your information was recently updated. Please wait a few minutes before proceeding.

BD4MM

I have applied for a license and am unsure how long it will take to receive a response. It has already been one day.

BG5UWQ

BD4MM 感谢大佬支持，目前执照认证是走人工多因素校验，时间会较长

闽ICP备2021006864号-7

闽公网安备35020602002794号互联网举报中心

用户协议隐私政策社区规范积分规则中继规则转载须知
更新日志联系我们常见问题友情链接运营报告赞助

浩奇科技（厦门）有限公司

是无线电，把我们联系在一起