HamTool 公测版发布，一款用于管理通联日志和打印卡片的工具，欢迎提出宝贵意见！一个管理无线电爱好者通联记录和打印卡片的小工具。该工具界面及思路参考了BH4JAO的Ham伴侣，并得到了授权，部分功能做了添加和改进。开发期间，由BI4JJO提供想法及思路，搭建页面信息，有小风程序员提供主力开发技术支持，界面框架由Tom支持，再此一并表示感谢。 [upl-image-preview url=https://storage.hamcq.cn/2024-01-10/1704859132-863350-1.png] [upl-image-preview url=https://storage.hamcq.cn/2024-01-10/1704859160-973843-2.png] 下载地址：链接: https://pan.baidu.com/s/1HiEvneGIYMh-CZGx0Zsm0g 提取码: 2du4 欢迎大家提出宝贵意见！有问题可以直接加QQ群：2283878 备注呼号信息

嗯嗯感觉不错哟，试用一下对了，要是界面能自由拉大或者最大化就好了.....

@"BA7NNC-JOE"#p8414 首页面没做最大化有点变形！所以把最大化取消了。。哈哈

作为不知名分流组（开玩笑的），看着文件不大不想分流，结果我愣是见到了平均90K/S的下载速度😤，所以还是分流下吧：蓝奏云:[https://wwi.lanzoup.com/iZv971kq9dpa ](https://wwi.lanzoup.com/iZv971kq9dpa) 备用：[传送门](https://pan.huang1111.cn/s/Da31u4)

@"BI6OTI"#p8433 哈哈阔以谢谢

尝试了一下，非常好，就是想请问怎么把通联日志导出？

相当不错，😁安装一个试试

@"BH4GTG"#p8446 下一步就做这个功能

HamTool beta version released, a tool for managing and printing QSL cards. We welcome your valuable feedback!

BI1TDK

Thank you for your hard work and dedication.👍 Currently, there's a problem where the program won't open after installation, and I'm receiving the following message. I am currently using version WIN7.
I'm not sure if there are any specific version requirements for the system.

BI4JJO

BI1TDK

Update net to version 4.8, please.

BI1TDK

[未知用户] Um, I already have .NET 4.8 installed, are there any other solutions?

BI4JJO

[未知用户] Upgrade the operating system to Windows 10 or later.

BH5HFK

What printers do everyone use?

BI4JJO

BH5HFK

Generally, using a needle-type printer is convenient.
I want to buy a bank card printing machine on Taobao for a few hundred yuan.

BD8DAU

Could you please optimize it for Satellite Communication (SATCOM)? Currently, importing satellite logs only provides data from a single frequency band.

BI4JJO

BD8DAU What additional parameters are required for Satellite Communication? Are there any special considerations regarding the logs?

BG2ELG

BI4JJO

Receives on independent frequencies; transmission mode is SAT.（PROP_MODE）, along with more satellite names（SAT_NAME）

<BAND: 2>2m
<BAND_RX: 4>70 cm
...
<PROP_MODE: 3>SAT
<SAT_MODE: 3>V/U
...
<Frequency: 6>145.99
<RX Frequency: 5>437.8
...
<SAT_NAME: 5>ARISS
...
<EOR>

BD8DAU

BI4JJO
It refers to the relay, with two frequency bands, and also includes the satellite name.

BI1MHK

BG2ELG Actually, the ground relay.<PROP_MODE: 3>RPTAlso requires frequency separation (
(So I wrote the software myself, 233)
Here, it's recommended to refer to the practices of eqsl and LoTW, specifically regarding... PROP_MODE In the "Arrive Early" mode, for example, if satellite mode displays as: FM (Satellite), repeaterFM (Repeater)

BG8LUZ

Can I use the device to control power, frequency, and other settings, and customize the pre-set content?

daitoudage

Thank you very much.

BI4JJO

[未知用户] Add basic settings in the later stage.

BI4JJO

BD8DAU Who can send me a log like this: BI4JJO#126.com

Bi4KKF

I tried it out – it's really good. Thumbs up!

BI4JJO

Bi4KKF Thank you, C佬. Yes!

xiang_xin

If possible, could you create an Android version? Sometimes, when transmitting outdoors, a computer isn't available.

BI4JJO

xiang_xin For Android, use qlog.

xyzyx

BI4JJO qlog有安卓版吗？还是说我找错了？可以给指个路吗？

BH9CA

That's great!

闽ICP备2021006864号-7

闽公网安备35020602002794号互联网举报中心

用户协议隐私政策社区规范积分规则中继规则转载须知
更新日志联系我们常见问题友情链接运营报告赞助

浩奇科技（厦门）有限公司

是无线电，把我们联系在一起