曾有过k6，改了10W和音质，最终改坏了。最近收了部坏的k5，修好之后感觉没什么意思又出掉了现在想换其他设备，但还是忘不了k6的频谱和其他自定义功能。希望大家给点建议，预算250。有原生大功率或频谱的最好。

有频谱的用过几个，最后还是感觉K6的频谱用着顺手，不如搞个K1继续用吧

K1就挺好的，感觉算下来还比K6便宜

K1相对K6，似乎没什么实质优点。（如果不嫌电池小，用K1标准版可以相对K6减小点体积、重量，算是有意义的升级吧😅）

@"BA4QDP"#p99639 非要说的话灵敏度稍微高点同一个弱信号K1基本能听清语音 K6断续严重

@"BG9JXB"#p99643 我咸鱼逛逛看。据说电路一样只有布局布线改了

@"BD6JYO"#p99661 我两个都有放一起对比过

Device selection after using K6 for fever reduction

BD6JYO

I previously had a K6, which I modified with 10W and improved the sound quality, but ultimately it broke. Recently, I received a broken K5, and after repairing it, I found that it wasn't very useful and ended up selling it.
Now I want to switch to another device, but I still can't forget the K6's spectrum and other custom features.
I hope you can offer some suggestions. I have a budget of $250 and would prefer something with native, high power or wide bandwidth capabilities if possible.

BG9JXB

I've tried a few different spectrum analyzers, but I found that the K6 was the most comfortable to use. I think it would be better to continue using the K1 instead of getting a new one.

BG7MGW

The K1 is pretty good; in fact, it seems to be cheaper than the K6.

BA4QDP

Compared to K6, the K1 doesn't seem to offer any significant advantages. (If you don't mind a smaller battery, the standard version of the K1 can be slightly smaller and lighter than the K6, which would be a meaningful upgrade.)😅）

BG9JXB

BA4QDP Things to note: * Slightly higher sensitivity * With a weak signal (K1), I can usually hear the voice clearly. * K6 has very poor audio quality.

BD6JYO

BG9JXB I browsed around on "Guangyu" (咸鱼逛逛). Apparently, only the layout and wiring were changed in the circuit.

BG9JXB

BD6JYO I have both of them and I've compared them together.

BD3QID

Build a shortwave radio.

闽ICP备2021006864号-7

闽公网安备35020602002794号互联网举报中心

用户协议隐私政策社区规范积分规则中继规则转载须知
更新日志联系我们常见问题友情链接运营报告赞助

浩奇科技（厦门）有限公司

是无线电，把我们联系在一起