已知ts570可以直接通过232连接电脑进行标准cat控制，可控制频率。但对音频的输入输出，以及机内音频输入的设置尚不了解。请教各位有没有什么解决方法？ ACC插口定义：[upl-image-preview uuid=9d9824cb-6a9f-4ce4-95f4-4485d3eb47de url=https://storage.hamcq.cn/2026-06-27/1782545408-114543-snipaste-2026-06-27-15-29-17.png alt={TEXT?}]

[upl-image-preview uuid=7f7fcb57-fef5-4603-8200-226d0d82b437 url=https://storage.hamcq.cn/2026-06-28/1782636209-610097-snipaste-2026-06-28-16-42-36.png alt={TEXT?}] [upl-image-preview uuid=9d81cc45-ac57-444d-a08a-de19fd0cf0f7 url=https://storage.hamcq.cn/2026-06-28/1782636211-695231-snipaste-2026-06-28-16-42-48.png alt={TEXT?}] [upl-image-preview uuid=30f92b07-b5bd-441f-9f85-672d4cc93014 url=https://storage.hamcq.cn/2026-06-28/1782636212-259622-snipaste-2026-06-28-16-43-11.png alt={TEXT?}] 找遍全网，都是所谓“盒子”配上专用连接线的方案😃

[upl-image-preview uuid=1fa111bb-9541-40f9-b3fb-87426ef90d42 url=https://storage.hamcq.cn/2026-06-29/1782741425-82851-image.png alt={TEXT?}] [upl-image-preview uuid=f8b2004f-25cf-49c2-914a-ed9e8e60ff71 url=https://storage.hamcq.cn/2026-06-29/1782741449-296368-image.png alt={TEXT?}] cat 控制的PTT信号，会静音后方ACC2的输入😅

[upl-image-preview uuid=ef9f9207-ddf3-4093-a8c8-5147001a8b1e url=https://storage.hamcq.cn/2026-07-02/1783001120-150125-e60208a67e8abcba488fdd69ea0912b3.jpg alt={TEXT?}] 连接线已经做好😊 [upl-image-preview uuid=3a9b531a-f26b-4cd4-ba69-9d844f2ded94 url=https://storage.hamcq.cn/2026-07-02/1783001190-114995-image.png alt={TEXT?}] 不折腾了，直接买Digirig Mobile算了🤣

接线图，仅供参考 [upl-image-preview uuid=ae50120e-1029-4e81-ae41-11de00b9fa75 url=https://storage.hamcq.cn/2026-07-02/1783001457-15959-image.png alt={TEXT?}]

Could you please advise on how to connect a Kenwood TS-570 to a computer for FT8 operation?

Richard_39130

I know that the TS570 can be directly connected to a computer via RS-232 for standard CAT control and frequency adjustment. However, I am not familiar with how to input and output audio signals, or configure the internal audio inputs. Could anyone suggest a solution?
ACC Port Definition:

Richard_39130

After searching across the entire internet, all the so-called "box" solutions involve using a dedicated connection cable.😃

Richard_39130

The PTT signal controlled by the cat will silence the input of ACC2 at the rear.😅

Richard_39130

The connecting cables are ready.😊

I'm giving up on it; I'll just buy the Digirig Mobile directly.🤣

Richard_39130

Wiring diagram, for reference only.

闽ICP备2021006864号-7

闽公网安备35020602002794号互联网举报中心

用户协议隐私政策社区规范积分规则中继规则转载须知
更新日志联系我们常见问题友情链接运营报告赞助

浩奇科技（厦门）有限公司

是无线电，把我们联系在一起