找了一圈支撑杆，基本上长度合适的收起来都要一米往上了。想找个高度足够，收起来在八九十厘米的，不知道有没有火腿买过类似的产品给我推荐点。

@"BG5GDP"#p98258 灯架有个4米的便携灯架，这周野架不小心受压铝管弯了。而且灯架也不是特别便携

@"Muffin"#p98261 还别说是有点想搞一支轻装时代的反折灯架来架天线的，不知道靠不靠谱

@"BG5VMD"#p98296 bro我用的就是这个牌子的4米反折灯架，今天售后发消息说两节铝管要换，一节35😓

@"Muffin"#p98322 哇塞感谢前人踩坑，看来重型灯架是真的绕不过去了

@"Muffin"#p98228 之前买的3.8米的灯架，感觉很结实，确实很沉，不想用。

gp 天线在地面有没有支撑的东东

@"BI4OAE"#p98432 沉还长，放车上不好放😂。所以才想要一根支撑杆好带一点

@"BG5VXJ"#p98458 硬质地面可以用地灯支架

高度够的收纳长度一定很长😂

Are there any portable antenna support poles?

Muffin

I've been looking for a support rod, and most of the ones I found that are roughly the right length require at least one meter when extended. I was hoping to find something with enough height that, when collapsed, it would be around 80-90 centimeters. Do you know of any brands that sell similar products, perhaps including ham?

BI4OAE

Muffin The floor lamp I bought previously (3.8 meters long) feels very sturdy and heavy, so I don't want to use it anymore.

BG5GDP

Ceiling light fixture?

Muffin

BG5GDP The lamp stand has a 4-meter portable lamp stand, but this week, the metal pipe on the stand was accidentally bent due to pressure. Also, the lamp stand is not particularly portable.

BG5VMD

Muffin And it's not just about wanting to build a lightweight, retro-style antenna support for a modern radio; I'm also wondering if it would actually work.

Muffin

BG5VMD Hey bro, I'm using this brand's 4-meter folding lamp stand. Today, the after-sales service sent a message saying that two of the aluminum tubes need to be replaced, and one is already broken (costing 35).

BG5VMD

Muffin Wow, thanks to those who came before me and learned from their mistakes, it seems that heavy floor lamps are truly impossible to avoid!

Liridice

Muffin I'm very interested in this lightweight antenna. Could you tell me what type of antenna you have that has a bent tube?

Muffin

BI4OAE It's too long to easily put on the car 😂. That's why I wanted a support rod to hold it up.

BG5VXJ

Does the gp antenna on the ground have any support, such as "Dong Dong"?

Muffin

BG5VXJ A hard surface can be used with a floor lamp stand.

Liridice

BG5VXJ A cross-shaped sunshade base can be used on hardened ground.

BG5BJM

The storage length must be quite long 😂

Muffin

BG5BJM The height can be compromised to allow for a more compact size, which makes it portable and easier to carry.

bg7xwf

Personally, I find the 7.3-meter lighting stand to be very comfortable and sturdy. It doesn't feel too heavy, at least not for me, and I'm happy to carry it around and set up wherever I need it.

BH5UNT

I used the tripod I bought previously for my telescope, along with three sections of Lenco rods (the type used for high-voltage switching). These can be assembled as needed.

BH3XZT

Is it a "right-hand" or "left-hand" rod, and if it's a right-hand rod, does it require a rod holder? If it's a left-hand rod, could you try using a fishing pole instead?

Muffin

BH3XZT Liridice This is JPC-12's positive voltage.

Muffin

Liridice It's likely that the antenna itself, rather than the pipe, is what bent. It probably happened due to wind or stress during installation. The resulting bend doesn't seem very durable.

Liridice

Muffin Is it the lower part that's bent, rather than the upright pole?

Muffin

Liridice 都有，底下弯了一节，上面也有一节

闽ICP备2021006864号-7

闽公网安备35020602002794号互联网举报中心

用户协议隐私政策社区规范积分规则中继规则转载须知
更新日志联系我们常见问题友情链接运营报告赞助

浩奇科技（厦门）有限公司

是无线电，把我们联系在一起