我已经拿到B证但还没拿呼号，手头预算实在有限，各位ham推荐的短波台好几千实在吃不消。目前昨天拿到了UVK6守听本地中继基本没声音，航空段120.35只听到了半句…… 因为啥也不懂，啥也没玩过，不知道该干啥了😂

既然考了B证，还有了K6，你要做的就是攒钱，其他UV段的机器都是在耽误你入短波坑

@"BG4IJK"#p7664 目前看了个g106c，5瓦的功率直接跨入QRP，开局难度好高

@"fang"#p7666 刚入A证，没碰过短波，但感觉还是攒攒钱再加预算换低难度机器比较好，另外别忘了天线、馈线和配件都要占预算

就劝一句，新人不首推QRP，UV段看颜值和手感

k6刷点固件，卫星打起来，短波攒起来

@"fang"#p7666 买了一个x6100，10w的功率，也是不太容易呼叫到人，玩ft8目前就呼到一个同网格的ham😂不嫌麻烦就尽量大功率，或者x6200快出了，也可以观望观望。

@"Bi4KKF"#p7674 QRP确实没那个能力😂

@"BG4IJK"#p7668 对所有的配件都要占预算，攒钱😂，今天又听了一晚上底噪

@"BH4GUG"#p7681 数据线在路上，770拉杆能打卫星吗？是不是还得搞个八木

@"BI1IPB"#p7682 攒钱观望😂

Recommendations for beginner-friendly machines and gameplay modes.

fang

I have obtained my B license, but I haven't yet acquired a call sign. My budget is very limited, and the shortwave radios recommended by ham radio enthusiasts for around several thousand dollars are unaffordable.
Yesterday, I received UVK6's local repeater signal, but it was very weak and barely audible. In the aviation segment, I only heard about half a sentence on 120.35 MHz.
Because I don't understand anything and haven't tried anything, I don't know what to do.😂

BG5CEO

fang 认识个周边老HAM吧，带着一起玩，先攒一攒经验，新手一上来就玩，走的弯路多还费钱，重点是打击自信

BG4JFQ

fang 是怎样做到拿了B证但是还没拿呼号的？不是要A证设台6个月以上才可以考B吗？

BG4IJK

Since you have obtained a B license and a K6, your priority should be to save money. The other UV-band equipment will only delay your entry into the shortwave hobby.

fang

BG4IJK I recently tried a G106C with a 5-watt output, and it was surprisingly difficult to get it working in QRP mode right away.

BG4IJK

fang I'm just starting with amateur radio, and I haven't worked with shortwave yet. However, I think it would be better to save some money and add a budget for a lower-difficulty machine. Also, don't forget to include the cost of antennas, cables, and accessories in your budget.

BI1IPB

fang I bought an X6100, which has a power output of 10W. It's not very easy to make contact with other stations, and I was only able to connect with another ham radio operator on the same grid during my FT8 operation.😂If you don't mind the hassle, try to get the most powerful one possible, or the X6200, which is expected to be released soon. You can also wait and see.

BI1QOC

fang 106c能干到10w呢

BG2EWI

fang 新人不要擅自上QRP设备，除非你的心理素质足够强大，不然大概率会变得不幸

fang

BG4IJK Allocate a budget for all accessories and save money.😂I listened to it again tonight, specifically the low-frequency noise.

Bi4KKF

I would suggest that new users should not immediately choose QRP; for UV segment, prioritize aesthetics and feel.

fang

Bi4KKF QRP definitely doesn't have that capability.😂

BI1LWR

Bi4KKF 现在15W以上都得申请大照了，新人以后看来只能QRP入门先。

BG2EFX

Bi4KKF 非常赞同！

BH4GUG

Update the K6 firmware, activate the satellite link, and collect shortwave signals.

fang

BH4GUG The data cable is in place; can a 770-meter dipole antenna work for satellite communication? Do I still need to install a Yagi antenna?

fang

BI1IPB Saving money and observing the market.😂

return0

BI1IPB

BI1IPB Like the 6100, I've worked a good number of calls on FT8 5W, including many from Chile and Brazil. There's plenty of room for QRP FT8 operation.😎

BH4GUG

fang The handle makes it difficult to transmit; you'll need a Yagi antenna.

BI6MBP

fang I bought a G90S on Double 11, along with the antenna and other accessories, for around ¥3000. I'm currently applying for a license. The 20W power is a bit small; it's just not feasible. If that's the case, I'll either go hiking or to the river/lake/wilderness.

BH4FCY

BI6MBP Using a G90s radio to operate FT8 allows you to contact many stations, although 10 watts can be challenging.

BI1IPB

return0 What antenna did your brother use? I'm not sure if it's the electromagnetic environment or the antenna efficiency that's causing the problem, as he can only get a few signals. Recently, I plan to wait for a day when I have time and try it out in the wilderness.