最近一直在研究短波SSTV通联的方式方法，不懂得很多，可参考的资料又很少，近期算是有点成果，赶上假期有时间，根据自己使用协谷G90电台经历编制了SSTV通联操作说明，文中主要讲述了有关SSTV通联软硬件准备、连接以及配置方法 [upl-image-preview uuid=7bc752fe-7aa0-4b8b-9ba8-020c42dc6233 url=https://storage.hamcq.cn/2026-01-03/1767414928-381727-screenshot-2026-01-03-123505-676.png alt={TEXT?}] 分享出来供大家参考，欢迎查漏，补充，这里是BI1SFC，73！注：没研究明白社区如何上传附件，这里放到网盘，也欢迎大家转存到其他链接方便多种方式下载链接: https://pan.baidu.com/s/1MpnUbUFzxneQaSI8oQW4MQ 提取码: G90N

补充说明：文档目录如下 [upl-image-preview uuid=11f57695-70ca-48ca-b735-990a1ebd096a url=https://storage.hamcq.cn/2026-01-03/1767444166-659263-screenshot-2026-01-03-204154-586.png alt={TEXT?}] 短波SSTV软件为YONIQ与Omni-Rig组合方案，只要Omni-Rig软件支持的电台，都可以通过YONIQ软件调用联动电台实现方便的SSTV通联，大大扩展原版MMSSTV软件使用范围，欢迎大家测试使用，探讨交流。

哈哈哈哈我刚想去旧帖子@一下结果发现就是你编写的，太速度了😍

谢谢楼主的分享，协谷电台SSTV、RTTY这方面的资料太少了

@"suiyi"#p92353 确实可参考的不多，RTTY我还没研究到哈

可以补个蓝奏云的链接吗

协谷电台只要是使用电脑联机方式发射，都要调到U-D，USB-dig，或叫上边带数，或者L-D，lsb-dig,下边带数。我忘记调整，设为USB模式，发现发射时声音传不过去😭

@"BA7NXE"#p92750 是的，只要涉及数字通信，就选L-D或者U-D模式，FT8、SSTV、FAX都选这个模式就对了，音频会自动从机身ACC输入输出，新固件对数字模式的ALC做了调整优化，更容易理解，探索未知，折腾不止😁

XieGu G90 Series Shortwave Radio SSTV Shortwave Communication Operation Manual

BI1SFC

最近一直在研究短波SSTV通联的方式方法，不懂得很多，可参考的资料又很少，近期算是有点成果，赶上假期有时间，根据自己使用协谷G90电台经历编制了SSTV通联操作说明，文中主要讲述了有关SSTV通联软硬件准备、连接以及配置方法

分享出来供大家参考，欢迎查漏，补充，这里是BI1SFC，73！

注：没研究明白社区如何上传附件，这里放到网盘，也欢迎大家转存到其他链接方便多种方式下载
链接: https://pan.baidu.com/s/1MpnUbUFzxneQaSI8oQW4MQ 提取码: G90N

BI1SFC

Additional information:
The document's table of contents is as follows:

The shortwave SSTV software is designed for the YONIQ and Omni-Rig combination. Any radio station that supports the Omni-Rig software can be accessed through the YONIQ software to enable convenient SSTV communication, greatly expanding the range of use for the original MMSSTV software. We welcome everyone to test and use it, and to discuss and share experiences.

BG5JKZ

Haha, I was just about to reply to an old post @[username] when I realized it was actually written by you! That's amazing.😍

BI1SFC

BG5JKZ Thank you, Aet.

BH1XAQ

Great! I've learned.😀

Hangying

That's great, I was just looking for something like that.

suiyi

Thank you for sharing this information. There's very little available about SSTV and RTTY on XieGu radios.

BI1SFC

suiyi There aren't many readily available resources to reference, and I haven't had a chance to study RTTY yet.

BI7ALG

Could you please provide a link to the Blue Zoom Cloud?

BA7NXE

For XieGu radios that use computer-based transmission, you must set the mode to U-D, USB-dig, or L-D, LSB-dig, depending on whether the signal is transmitted with a high or low frequency.
I forgot to adjust it and set it to USB mode, but when I tried transmitting, the sound wouldn't go through.😭

BI1SFC

BA7NXE Yes, for any digital communication, choose the L-D or U-D mode. For FT8, SSTV, and FAX, this is the correct choice. The audio will automatically come from the ACC input/output on the body. The new firmware has adjusted and optimized the ALC for digital modes, making it easier to understand and explore.😁

闽ICP备2021006864号-7

闽公网安备35020602002794号互联网举报中心

用户协议隐私政策社区规范积分规则中继规则转载须知
更新日志联系我们常见问题友情链接运营报告赞助

浩奇科技（厦门）有限公司

是无线电，把我们联系在一起