K6 使用K5web刷Losehu固件刷入字库后背光常量+黑框闪烁。

如果你的设备没扩容，不要刷入H版本固件如果本身刷入的就不是H版本固件，关机重新进入刷机模式继续刷写测试

可以先刷回官方固件，然后刷第三方固件时记得看清描述，选择适合自己机器的版本。温馨提示，记得备份校准。~~吃过亏~~😅

@"BG2GFC"#p87807 扩了叠叠乐4MiB

@"BG9JXB"#p87820 也刷了刷了好几回

刷机之前先备份，实在不行就先还原原来的版本先使用着，后续可以再买一个机器做刷机研究用

K6 flashing: Need a solution for backlight/black frame issue.

BY1051SWL

When using K6 to flash the Losehu firmware after adding a dictionary, the backlight constant and black box flicker.

BG2GFC

If your device doesn't have expansion capabilities, do not flash with H version firmware.
If the firmware that was initially flashed isn't the H version, try turning off and re-entering flash mode to continue flashing and testing.

BY1051SWL

BG2GFC Expanded "叠叠乐" to 4 MiB

BG9JXB

Also, I need to load the dictionary.

BY1051SWL

BG9JXB I also tried it several times.

ZiYip

First, you can flash back to the official firmware, and then when flashing third-party firmware, be sure to read the description carefully and choose the version that is suitable for your device. Reminder: Remember to back up the calibration settings.~~Having been wronged~~😅

BG2EFX

The dictionary hasn't been updated.

debain

Before flashing, back up your device first. If that doesn't work, restore to the original version and use it for research before purchasing a second one.

闽ICP备2021006864号-7

闽公网安备35020602002794号互联网举报中心

用户协议隐私政策社区规范积分规则中继规则转载须知
更新日志联系我们常见问题友情链接运营报告赞助

浩奇科技（厦门）有限公司

是无线电，把我们联系在一起