Departing from home at 8:20, I traveled by electric vehicle to the previously selected auspicious location. Arrived at the destination at 8:41 and began unloading.

The antenna was assembled in 4 minutes, and connected to the SDR. The RSJ U5V2 Maxon antenna was used, and the SDR uses an RTL SDR (version unknown).

Turn on the computer, open SDR#, Orbitron, GNURadio, LQV decoding software, and Hao Gong's "Meow Meow" mysterious little software, and begin the SDR hot-start calibration.

At this point, there are still 3 minutes until the satellite enters the atmosphere.
The total transit time was over 10 minutes, with a maximum angle of elevation of approximately 60 degrees. We successfully received the remote data and are preparing to shut down.

Trading at 9:13 AM has concluded; preparing to return.

The entire process takes approximately 1 hour in total, with the remote monitoring procedure taking only 10 minutes.