前段时间，有参与三体的STTV接收活动，也一直想尝试自己发送SSTV，目前大家所推荐的MMSSTV这个软件，一直没琢磨明白，有尝试过的朋友，可以告知要如何设置吗？

@"BI7ALG"#p86126 其实不用特别设置就行了 SSTV信号是通过SSB发送出来的接收的话只要频率对了模式对了就行剩下的看传播情况

@"BI4MPY"#p86140 试了好多次都没发射出来，机型里面也没有这个型号，FT8的设置经验完全用不上，问了好多圈内好友，也没说出个所以然。

可以用Yoniq，一个新版的mmsstv，支持omnirig，omnirig支持的电台软件就能用 https://radiogalena.es/yoniq/ [upl-image-preview uuid=3b753c58-88f2-4f26-add0-540255226fbf url=https://storage.hamcq.cn/2025-11-12/1762950187-635136-screenshot-20251112-202257.jpg alt={TEXT?}]

可以用 Yoniq，一个新版的 mmsstv，支持 omnirig，omnirig 支持的电台软件就能用 https://radiogalena.es/yoniq[upl-image-preview uuid=966e3257-ab3e-4660-9c15-740ebcfb9346 url=https://storage.hamcq.cn/2025-11-12/1762950344-848707-yoniq.jpg alt={TEXT?}] /

@"BG5VLI"#p86148 这个软件怎么使用，能大概说明下吗

设置好声卡，设置com口，设置机器型号试试

@"BI7ALG"#p86157 和原版mmsstv几乎一模一样，只是没有自带电台接口了，和电台的所有交互都通过omnirig，接收的话配置好声卡就行，发射的话选好图片做好模版，omnirig中选择好电台配置发射就行

@"BG5VLI"#p86171 怎么改语言啊，默认这个语言乱码，这个软件确实好用，今晚发送成功了，就是语言乱码。[upl-image-preview uuid=652843a0-64d9-457f-ad98-5c85212e049e url=https://storage.hamcq.cn/2025-11-12/1762960462-346337-19f4ad1972955e2baa073128e6e549e1.png alt={TEXT?}]

@"BI7ALG"#p86172 语言默认是西班牙语，在设置中可以改成英语，印象中是在某个设置界面的右下角有三个按钮，选择english就行

Could you please advise on how to use an FT-710 for SSTV transmission and reception?

BI7ALG

A while ago, I participated in the STTV receiving activity. I've also been wanting to try sending SSTV myself. However, I haven't been able to figure out how to use the MMSSTV software that everyone recommends. If anyone has experience with this, could you please tell me how to set it up?

BI4MPY

BI7ALG In reality, no special settings are required. SSTV signals are transmitted via SSB. To receive them, you just need to ensure the correct frequency and mode. The remaining factors depend on propagation conditions.

BI7ALG

BI4MPY I tried multiple times, but it wouldn't transmit. The device itself doesn't have this model number. The FT8 settings experience I had wasn't helpful at all. I asked many friends in the industry, but no one could explain why.

BI4MPY

BI7ALG +V: BI4MPY

BG5VLI

You can use Yoniq, a new version of mmsstv, which supports omnirig, and any radio software that omnirig supports.

https://radiogalena.es/yoniq
/

BI7ALG

BG5VLI Could you please provide a general overview of how to use this software?

BG5VLI

BI7ALG It is almost identical to the original MMS-TV, but it lacks a built-in radio interface. All interactions with the radio are done through omnirig. For receiving, simply configure your sound card. For transmitting, select the image and create a template, then choose the radio configuration in omnirig and start transmitting.

Bi4KKF

Set up the sound card, set up the COM port, and specify the machine model. Then try it out.

BI7ALG

BG5VLI How do I change the language? The default language is garbled, and this software is actually very useful. I successfully sent a message tonight, but the language is still garbled.

BG5VLI

BI7ALG The default language is Spanish, but it can be changed to English in the settings. I believe there are three buttons located in the lower right corner of a specific setting interface; selecting "English" will change the language.

bg5axs

Sometimes, I also send scenic photos to my friends via the outdoors app, using both a small app and a regular radio for transmission. Here's a link to my app so you can try it: https://mp.weixin.qq.com/s/rhLbTlS5dW0CXmpzfnK_Nw

bg5axs

You can also quickly launch the PPT by holding it close to the device.

BA7NXE

Received!😁

BI7ALG

A. Mode: DATA-U

B.RPPT chooses DTR

C. Configure MMSSTV (Enhanced COM Port)

闽ICP备2021006864号-7

闽公网安备35020602002794号互联网举报中心

用户协议隐私政策社区规范积分规则中继规则转载须知
更新日志联系我们常见问题友情链接运营报告赞助

浩奇科技（厦门）有限公司

是无线电，把我们联系在一起