Let's start with the overall specifications.
5-meter tower, main pole irrigation with concrete.
This design consists of 1 main pole and 4 legs.
There are a total of 14 steel wire support towers, with each tower having a single cable for fixing the antenna.
700 kg load capacity flower basket screws
10 cm expansion screw
An additional manual rotator with a purely mechanical structure could save even more energy. Attaching two plastic steel ropes should not significantly affect it.
The original poster has already purchased all the materials. I will send pictures later so everyone can see how they look.
Currently, focusing solely on the structure seems to be quite stable.
I don't think there should be any problems with it moving up and down, left and right.
The cost of such a tower would be around 890 roubles, and shipping within Russia should not exceed 200 roubles.
The total cost of the tower was approximately $1090, which was slightly less than the estimated $1100.
I incurred extra shipping costs of 580 RMB because the package was mislabeled as "Waven". The shipping cost chart is not relevant.
I also designed a cheaper tower with a reduced footprint, which I didn't consider installing myself. So, it was essentially a conceptual design.
However, those who want to build a tower but are concerned about the cost can also refer to this design.
Although it's said to be a low-cost option, the main stem still requires concrete pouring.
The guy wire also did not decrease; it was still 12 + 2 (Yagi-Uda antenna support rope).
The cost of the tower can be reduced to approximately 565 RMB, which is equivalent to 2431 CNY (excluding shipping costs).
Finally, I would like to state that I am not responsible for this product in any way. I am only providing my thoughts and opinions. Please use them at your own discretion.
Please follow your local regulations and your own capabilities.
Please enjoy yourself in the world of radio while prioritizing safety!<
闽ICP备2021006864号-7
闽公网安备35020602002794号