最近刚给k6刷了cec0.3的固件，听说可以发CW，但尝试设置未取得成功，网上也没找到说明书或者教程，求大佬指点🙏

http://www.hamskey.com/ ←开发者KD8CEC的个人主页

记得外部电建的连接线要自己往上串接电阻, 然后要关掉机内的数字模式才能正常试用外部电建

我按照这个做的连接线，https://www.hellocq.net/forum/read.php?tid=378842，配合连接电脑的自动cw小板试验成功发射cw

I need help. I recently flashed the K6 with the CEC0.3 firmware, and I heard that it can transmit CW signals.

BI9BSL

I recently flashed K6 with the cec0.3 firmware, and I heard that it can transmit CW signals. However, I tried setting it up but was unsuccessful. I haven't been able to find any instructions or tutorials online either. Could someone please provide guidance?🙏

BH1LAF

https://zhuanlan.zhihu.com/p/691551480
https://www.bilibili.com/video/BV11u4m1T7yU/?vd_source=c52821a6ed06b961ae8447bc1236e78b

BH5UNT

http://www.hamskey.com/ ← Developer KD8CEC's personal page

BI9BSL

BH5UNT Thank you

BD8DIN

Remember to manually connect the external cable with resistors, and then disable the digital mode inside the device before using it externally.

BI9BSL

BD8DIN Thank you for the reminder.

BG5JKZ

I followed the wiring diagram you provided.https://www.hellocq.net/forum/read.php?tid=378842Successfully launched a CW test using an automatic CW small board connected to the computer.

BI9BSL

BG5JKZ Thank you for sharing.

闽ICP备2021006864号-7

闽公网安备35020602002794号互联网举报中心

用户协议隐私政策社区规范积分规则中继规则转载须知
更新日志联系我们常见问题友情链接运营报告赞助

浩奇科技（厦门）有限公司

是无线电，把我们联系在一起