BD1BUK 本人纯萌新，完全不会焊板子，所以请大佬们尽量推荐某宝某夕夕能直接买到的东西😂 最近在尝试接收SSTV图像，因为家里信号一般，室外会好些但环境噪音很嘈杂，再加上本人比较社恐，不敢手台外放录音😭 所以想尝试能不能用手机直接内录手台声音，然后拿回家慢慢解析。
BG6TON https://www.mydigit.cn/forum.php?mod=viewthread&tid = 456822&page = 1 DIY phone internal recording and external microphone input cable
BD1BUK BG6TON Thank you, but it's still a bit difficult for me. I'll try the simpler method first, and if that doesn't work, then I'll use this one.😂
BG4QBF How to convert a K-type connector to a 3.5mm connector? The two round holes on the side, with diameters of 2.5 and 3.5, are likely for output and input respectively.
BG9JXB Previously, I used a K-connector to connect the microphone and recorder, and there was no additional noise.
BH5UNT BD1BUK Oh? Does your phone not have a 3.5mm jack...? Then you'll need to buy another USB Type-C to 4-pin 3.5mm connector cable. This is commonly called a "Type-C recording cable."
BD1BUK BH5UNT Unfortunately, with current mobile phones, there's only the Type-C port available.😂 If connected this way, would I then be completely unable to hear the radio's audio during recording?
BI1UDG-711 2. 5mm audio jack, which can be used to connect a 3.5mm audio jack or a C-type connector to your recording equipment.
troilus Also, get a 1.2m audio cable, otherwise you won't be able to adjust the device based on the receiving effect.
BD1BUK troilus Oh, right, thanks for reminding me. I almost forgot about this. So, generally, where is the best place to insert it – port 1 or port 2?😂
闽ICP备2021006864号-7
闽公网安备35020602002794号