这两天通过TQSL上传日志的时候，一直提示 "File does not appear to be a TrustedQSL file "，签名状态是正常的，但就是提示错误，重新签名也不行，有没有哪位大佬遇到过这个问题，能给指导一下，谢谢

是tq6文件有问题还是p12文件有问题？

@"BG9JDQ"#p80551 就是在签名日志上传的时候提示这个问题，我检查了一下，我是在使用wavelog上传tqsl日志后出现了这个问题

@"BG9PQO"#p80555 是用TQSL软件上传的时候报错吗，现在用wavelog上传的时候也会报错吗

@"BG9JDQ"#p80556 软件上传报错，wavelog正常

@"BG9PQO"#p80557 可以试试把tq6证书保存好，然后把TQSL里面的台站都删掉，重新导入tq6证书然后新建台站试试。台站对应的p12证书，你的呼号对应的tq6证书。有可能是p12证书有什么问题了。

@"BG9JDQ"#p80558 都试了一遍还是不行，软件卸载重装，重新导入两个证书都不行，换了日志文件也不行，有点尴尬

@"BG9PQO"#p80559 请问您要上传的是不是别的软件导出的adif文件？可以先试试用TQSL自带的日志系统添加生成一个记录，然后上传试试。要是这样还不行的话说明是证书文件的问题，如果可以上传的话说明是导出的adif文件的问题。

@"BG9JDQ"#p80561 我最开始想到的也是这个问题，就手动生成了一条日志，结果也是一样的问题，换了软件的日志也不行，看来就是证书出现了问题，官网查询说是我日志格式问题，现在搞不清楚了。

看一下网格对不对，，tsql做天升级过后，自动手动都不行，手动包网格om34与日志om34rj，最后把tsql站台网格改成om34rj，好了

@"BH9FPK"#p80568 反复改了网格后缀，也是不行

TQSL upload failed, and it does not appear to be a TrustedQSL file.

BG9PQO

When uploading logs through TQSL these past few days, I keep getting the error message "File does not appear to be a TrustedQSL file", even though my signature status is normal. Resigning doesn't fix it either. Has anyone else encountered this issue? Any guidance would be greatly appreciated. Thank you.

BG8LGP

BG9PQO Upload the logs directly to the lotw website and check if the upload was successful. If it wasn't, what error messages did you receive?
If possible, please open the signed log file in a text editor and copy and paste it into the discussion forum so I can take a look.

BG9JDQ

Is the issue with the tq6 file, or the p12 file?

BG9PQO

BG9JDQ The issue arose when I was uploading a signature log, and after checking, I found that this occurred after using wavelog to upload a tqsl log.

BG9JDQ

BG9PQO
Does it error when uploading using the TQSL software? Does it also error when uploading using WaveLog now?

BG9PQO

BG9JDQ Software upload failed, wavelog is working normally.

BG9JDQ

BG9PQO
You can try saving your TQ6 certificate, then deleting all stations in the TQSL file, and then re-importing the TQ6 certificate and creating new stations.
The P12 certificate corresponding to your ground station, and the TQ6 certificate corresponding to your call sign. It's possible that there is a problem with the P12 certificate.

BG9PQO

BG9JDQ I've tried everything, including uninstalling and reinstalling the software, re-importing both certificates, and even changing the log files, but nothing seems to work. It's quite embarrassing.

BG9JDQ

BG9PQO
Are you uploading an ADIF file that was exported by another software?
You can first try using the built-in logging system of TQSL to generate a record, and then upload it to see if it works.
If this still doesn't work, it indicates a problem with the certificate file. If you can upload it, then there is likely an issue with the exported .ADIF file.

BG9PQO

BG9JDQ Initially, I thought it was this issue, and I manually generated a log file. However, the problem persisted, and even changing the logging software didn't resolve it. It seems like there's an issue with the certificate. According to the official website, the problem is related to my log format. Currently, I'm not sure what the cause is.

BH9FPK

Let's check if the grid is correct. After upgrading to tsql, both automatic and manual methods don't work. I manually configured the om34 and log om34rj grids, and finally changed the tsql station grid to om34rj, and it worked.

BG9PQO

BH9FPK I have repeatedly changed the grid suffix, but it still doesn't work.

BG9PQO

The official website states this.
"Sign and upload your logs - ARRL"
If you receive a message like this: "[FILE] does not appear to be a TrustedQSL file! Processing aborted. It is likely that the log file you selected for upload is an ADIF file or some other type of file, and not a TQ8 file."
However, I was previously uploading .ADIF files, but that's no longer working.

BH9FPK

BG9PQO

Check if the certificate is still valid.

BG9PQO

BH9FPK The expiration date isn't an issue. I can use it until 2027, and my other computer is working fine. However, the main computer isn't uploading properly. I plan to troubleshoot further according to the official instructions. Thank you.

BH9FPK

BG9PQOUninstall, reinstall, and then import the certificate from a backup on another computer.

BG9JDQ

BG9PQO
This might be related to the configuration file for TQSL. When installing TQSL on Linux and macOS, a new directory will be created in the user's home directory..tqslThe folder contains configuration files.
After uninstalling TQSL, this folder will not be automatically deleted.
You can check where the TQSL configuration file is located on Windows, and then delete the entire configuration folder before uninstalling and reinstalling.

BG9PQO

BG8LGP

BG9JDQ

BH9FPK
I can upload directly through the website, but it's limited to the tq8 format; I cannot directly upload files in the adi format.
Following everyone's advice, I completely removed all software certificates and uninstalled the software. However, I installed an older version that I had previously downloaded. Currently, the software is functioning normally. I'm not sure if this is related to a software update, so I will continue to monitor it for a while to see if it remains stable. Thank you all for your help.

BH6BMJ

I've also been experiencing this issue since I updated a few days ago. It seems to happen no matter how I try to transfer.

BH6BMJ

Resolved. See details at https://forum.hamcq.cn/d/6949

闽ICP备2021006864号-7

闽公网安备35020602002794号互联网举报中心

用户协议隐私政策社区规范积分规则中继规则转载须知
更新日志联系我们常见问题友情链接运营报告赞助

浩奇科技（厦门）有限公司

是无线电，把我们联系在一起