刚考完A证，这两天在守听，还没发射过，刚才查中继的时候发现微信小程序业余无线电工具集的数据和咱站的频差数据不一致，一个-5一个-8，哪个正确[upl-image-preview uuid=858a7a11-601e-4d0e-8d61-4485f2283ec5 url=https://storage.hamcq.cn/2025-09-26/1758867376-749821-screenshot-20250926-141409.jpg alt={TEXT?}]

两个都可以，之前因为工地干扰偶尔停用了一阵子下差5，现在应该是两个都可以

@"BD3ROR"#p80325 两个都可以？中继上行对两个频率都有反应，是这个意思吗

@"BA4SUA"#p80328 对的，应该是有两个上行接收机，我个人用的是下差8

-5好像不太好使，也可能是我测的时候恰好没人在听，我平时用-8

Which of the two frequency offsets for the Shijiazhuang repeater is correct?

Tr-AIL

I just got my A license and have been listening for the past few days, but haven't transmitted yet. When I checked the repeater data recently, I found that the frequency offset data from the WeChat amateur radio tool collection doesn't match the data for my station; one is -5 and the other is -8, which one is correct?

BD3ROR

Both should work. Previously, I had to temporarily stop using one due to interference from the construction site, which caused a drop in performance. Now, it seems both are working correctly.

BA4SUA

BD3ROR Can both of them work? Does the repeater respond to both frequencies?

BD3ROR

BA4SUA Yes, there should be two uplink receivers. I personally use the "下差8" receiver.

BD3QID

All are fine.

Tr-AIL

-5 seems to be malfunctioning; it might also be that I was testing it at a time when no one else was using it. I usually use -8.

闽ICP备2021006864号-7

闽公网安备35020602002794号互联网举报中心

用户协议隐私政策社区规范积分规则中继规则转载须知
更新日志联系我们常见问题友情链接运营报告赞助

浩奇科技（厦门）有限公司

是无线电，把我们联系在一起