N1MM CW连接FTDX10进行CQWW CW说明一、电台端配置 [upl-image-preview url=https://storage.hamcq.cn/2023-11-26/1701013104-432291-image.png] CW SETTING里面PC KEYING选择DTR [upl-image-preview url=https://storage.hamcq.cn/2023-11-26/1701013111-44378-image.png] OPERATION SETTING里面通讯波特率CAT RATE要与电脑PC端保持一致，采用默认的38400；CAT RTS选择ON 二、电脑端 [upl-image-preview url=https://storage.hamcq.cn/2023-11-26/1701013116-270674-image.png] [upl-image-preview url=https://storage.hamcq.cn/2023-11-26/1701013120-536857-image.png] [upl-image-preview url=https://storage.hamcq.cn/2023-11-26/1701013128-895593-image.png] 配置完成后，即可在电脑上进行CW拍发了。

有没有7300的设置方法？

opr换dx10了？啥时候的事情？

@"BI4IVM"#p5446 鹅毛球的啊，上次鹅毛球直播时候买的。有大半年了吧。执照9月初就批复了。

@"BH8AVW"#p5344 我回头查下，应该有人在小破站发过了。

@"BI6OPR_loogarch"#p5484 好的谢谢

@"BI6OPR_loogarch"#p5483 哦哦哦想起来了哈哈

N1MM CW connection to FTDX10 for CQWW CW instructions.

BI6OPR_loogarch

N1MM CW连接FTDX10进行CQWW CW说明
一、电台端配置

CW SETTING里面PC KEYING选择DTR

OPERATION SETTING里面通讯波特率CAT RATE要与电脑PC端保持一致，采用默认的38400；CAT RTS选择ON
二、电脑端

配置完成后，即可在电脑上进行CW拍发了。

BH8AVW

Are there any settings for the 7300?

BI6OPR_loogarch

BH8AVW I'll check again to see if it has already been posted on Xiaohao.

BI4IVM

Has the OPR upgraded to DirectX 10?
When did this happen?

BI6OPR_loogarch

BI4IVM The goose feather balls – I bought them during the previous goose feather ball live stream, about half a year ago. The license was approved in early September.

BI4IVM

BI6OPR_loogarch Oh, I remember now! Haha.

BH8AVW

BI6OPR_loogarch Okay, thank you.

闽ICP备2021006864号-7

闽公网安备35020602002794号互联网举报中心

用户协议隐私政策社区规范积分规则中继规则转载须知
更新日志联系我们常见问题友情链接运营报告赞助

浩奇科技（厦门）有限公司

是无线电，把我们联系在一起