[upl-image-preview uuid=6acf028f-206b-4b95-b36e-6f86aec703a5 url=https://storage.hamcq.cn/2025-09-10/1757496394-964923-20250910172614.jpg alt={TEXT?}] 用python模拟了下aprs位置发包到aprs-is服务器的行为，然后自己在圆上均匀取5个坐标点，按照画五角星的顺序发送aprs位置包，最后在aprs地图查看轨迹就出来了。

昨天大伙都玩疯了，都在画圈圈🤪

你中奖了，快去拿马克杯🤭

@"BA7NNC-JOE"#p78316 大家都用什么软件画的啊

@"BH7HCU"#p78320 收到邮件并回复了😁

@"CQCQCQ"#p78313 之前我玩的根据路径规划路线，且配速不同，自动规划完路径后就能自动跑。。。。后来被某地老HAM告知某APRS地图，就把我信息给屏蔽了..... [upl-image-preview uuid=7b009724-21ae-4c17-a8ca-ac3a6601e0f5 url=https://storage.hamcq.cn/2025-09-11/1757554950-856060-7b009724-21ae-4c17-a8ca-ac3a6601e0f5.png alt={TEXT?}]

@"BI4IVE"#p78410 就我傻傻的用python写了个脚本跑的吗？不过没关系被屏蔽了可以自己建一个aprs地图

感觉 APRS （直接脚本发包）画图有悖于 APRS 的设计初衷，而且对 APRS 网络的影响不太好呢......（比如如果有 iGate 开着 APRS-IS to RF 什么的）

@"BI1XJT"#p78538 APRS中继一般不转发APRS-IS信息吧？

I drew a pentagram on the APRS map.

CQCQCQ

I simulated the APRS position reporting behavior to an APRS-IS server using Python. Then, I randomly selected 5 coordinates on a circle and sent APRS position packets in the order of drawing a pentagon. Finally, by viewing the resulting trajectory on an APRS map, the path was clearly visible.

BI4IVE

CQCQCQ Previously, I used a path planning route with different speeds, and the system would automatically generate the route and then start running. However, after using a specific APRS map provided by an experienced amateur radio operator, my information was blocked.

BI7ALG

CQCQCQ That's amazing!

BA7NNC-JOE

Yesterday, everyone was having a lot of fun, drawing circles everywhere.🤪

CQCQCQ

BA7NNC-JOE What software do everyone use to create artwork?

BH7HCU

Congratulations! Please go and collect your mug.🤭

CQCQCQ

BH7HCU Received the email and replied.😁

BH7HCU

CQCQCQ 🤭

CQCQCQ

BI4IVE Did I just write a Python script and run it, which got me blocked? No problem, I can create my own APRS map.

BI1XJT

I feel that using direct scripting for drawing in APRS goes against the original design intent of APRS, and it also has a negative impact on the APRS network... (for example, if an iGate is running APRS-IS to RF).

BG6UFA

BI1XJT Do APRS repeaters typically not forward APRS-IS messages?

BG2EFX

BG6UFA
If iGate opens IS to RF, it will forward.
I don't think it's a good idea.

BH2VYJ

Don't make it so complicated.

BG5BVC

I recommend against doing this, especially if it's just for technical testing. You could consider building your own map and using it instead. The aprs.tv server is accessible within China, and the asia.aprs2.net server is accessible globally. Please be aware of international implications.

闽ICP备2021006864号-7

闽公网安备35020602002794号互联网举报中心

用户协议隐私政策社区规范积分规则中继规则转载须知
更新日志联系我们常见问题友情链接运营报告赞助

浩奇科技（厦门）有限公司

是无线电，把我们联系在一起