有没有什么新奇的玩法？数字模式通联声音跟电音一样，失真太严重了，有没有啥小技巧？有更换过开机图片的么？我用软件握手不上，cps软件直接就能握手成功进行电脑编程配置

开机图片不是用CPS改的，是另外一个软件，握手不上的话可能是少安装了驱动，我这边有，但是网站提示大小超了，传不上来。

@"[未知用户]"#p75266 不知道可不可以传网盘链接，先传一下，驱动和更改开机图片的包都在里面，通过网盘分享的文件：Baofeng_DM-32UV_Picture_Tool.zip等2个文件链接: https://pan.baidu.com/s/1HQqZ0Aj-5nZwhOpENioFPA?pwd=bh7i 提取码: bh7i --来自百度网盘超级会员v10的分享

@"[未知用户]"#p74990 1. 你看看通联的时候是你发射对方说想电音，还是你接收别人信号像电音？ 2. 你是通过本地数字中继进入还是通过mmdvm盒子进入？电音失真的问题主要是网络传播造成的丢包（本地数字中继丢包更严重）你可以通过盒子检查一下对方的丢包情况以及自己的都报情况。适当调整wifi网络信号，总之丢包和链路环境有关系，和机子没多大关系；

@"teddymail"#p74990 DMR声音失真正常，cps你可能是波特率或驱动问题

@"bh1cqz"#p75270 我使用的是北京438800的数字中继台进行通联的，确实声音市场就好像数字机器人声音特效的感觉，不清晰，跟模拟台完全两码事的体验

@"teddymail"#p75625 通过中继准信好的确有着各种请款发生，你也可以尝试一下盒子接受，会比中继好一丢丢

@"BA4IYW"#p75269 还是显示打开端口失败，我安装了那个。net啥的东西，就包里的还是不好用呢

@"teddymail"#p77916 右键我的电脑-管理-设备管理器-串口，看下你的写频线在COM几，然后在CPS的设置-串口设置，选择对应的，波特率512000再试试。

@"BA4IYW"#p77925 我终于替换成功了，我换了一台windows电脑就成功了，苹果笔记本安装windows 10系统还是有兼容问题的

Does anyone use the BaoFeng DM32 radio?

teddymail

Are there any new and interesting ways to use it? The digital mode, with its voice and electronic music compatibility, has excessive distortion. Are there any tips or tricks I can use? Have you ever changed the startup image? I'm having trouble connecting with software; CPS software allows me to successfully connect and configure my computer.

BH6RIZ

teddymail It's normal for DMR audio to have distortion; the CPS issue might be related to baud rate or driver problems.

BA4IYW

The boot image was not modified using CPS; it's a different software. If the handshake fails, it might be due to missing drivers. I have one, but the website indicates that the file size is too large and cannot be uploaded.

BA4IYW

[未知用户] I'm not sure if it's possible to share a link to a cloud storage service. I'll upload the files first. The driver and image changing package are included in the following files: Baofeng_DM-32UV_Picture_Tool.zip and other files.
Link: https://pan.baidu.com/s/1HQqZ0Aj-5nZwhOpENioFPA?pwd=bh7i Extraction code: bh7i
– Shared from Baidu Netdisk Super Member v10

teddymail

BA4IYW It still shows that the port opening failed, and I installed that .net thing, but it's not working properly in the package.

BI3SVM_Rinko

BA4IYW Hello, could you please upload it again?

bh1cqz

[未知用户]

When you're using a walkie-talkie, are you transmitting and the other person responds with "I want music," or are you receiving their signal as if it were music?
Are you accessing the repeater through a local digital repeater, or through an MMDVM box?

The issue of distorted audio is primarily caused by packet loss due to network transmission (packet loss is more severe with local digital repeaters). You can check the packet loss situation for both parties and your own devices using a tool. Adjusting the Wi-Fi network signal appropriately is key. Ultimately, packet loss and the link environment are related, and have less to do with the equipment itself.

teddymail

bh1cqz I am using a digital repeater located at Beijing 1004388 to communicate, and the audio quality is very different from that of analog repeaters. It feels more like using digital sound effects, but it's not as clear or natural-sounding as an analog system.

bh1cqz

teddymail Using a repeater with good signal quality can definitely lead to various payment issues, but you could also try using a box to receive the signal; it might be slightly better than using a repeater.

BA4IYW

teddymail Right-click "My Computer" - Manage - Device Manager - Serial Port, check which COM port your serial cable is connected to. Then, in CPS settings - Serial Port Settings, select the corresponding one and set the baud rate to 512000 and try again.

teddymail

BA4IYW I finally managed to replace it successfully. By switching to a Windows computer, I was able to install Windows 10 without any compatibility issues. Installing Windows 10 on an Apple laptop still presents some compatibility problems.

BA4IYW

teddymail As long as it works, I've been tinkering with a car project myself recently, and I also upgraded the computer.😂

wang186

I've just purchased a DM32. How do I connect it to my computer? What software should I use to transfer the boot image? Please advise, thank you.

BG3MYJ

wang186 Go to the BaoFeng official website in the US and download the write-in software, then connect using the write-in cable.

BA4IYW

BI3SVM_Rinko Files shared via cloud storage: Baofeng\_DM-32UV\_Picture\_Tool.zip and 2 other files.
Link: https://pan.baidu.com/s/1g5M5f_XcM6hgocspDB_XrQ?pwd=aufu Extraction code: aufu
– Shared from Baidu Netdisk Super Member v10: Here it is!