我想用G90s 连接电脑ft8,电台电源使用小米的插座来控制电源，如果电台断电，重新来电，G90s会自动开机吗？

99%的电台都有断电记忆功能

有没有什么办法可以实现，就是不按开机键能自动开机，其它用户cat控制

cat接口好像没有能控制开关机的引脚，硬要说的话就只能往电源按钮那加个舵机，或者焊个继电器了吧（

不会自动开机。想稳定实现这个功能可能要改改电路。官方给的指令手册也没看到涉及开关机的内容，可能电路设计上必须要先开机主控才会上电接收指令。

我打电话给协谷了，下周再问问，有谁知道891有没这样的功能

@"feng"#p74652 八重洲好像有吧，我那台817可以实现这个，只要你开机的时候断电，下一次上电就可以自动开机

Can the G90S automatically turn on?

feng

I want to use the G90S to connect my computer to the FT8 radio. I plan to use a Xiaomi power adapter to control the radio's power, but will the G90S automatically turn on when the radio loses power and is restarted?

BG4JGL

I don't know.

bd3si

No way…

feng

Is there a way to achieve this, where it can automatically turn on without pressing the power button, and other users can control it via CAT?

BG4KIS

It seems there isn't a pin on the cat interface that can control power-on/off. If I had to, I would either add a servo motor to the power button or solder in a relay.

BG6HFD

It doesn't automatically power on. To reliably implement this feature, you might need to modify the circuit. I didn't find any instructions in the official manual that mention turning the device on or off. It seems that the circuit design requires the main controller to be powered on first before receiving commands.

feng

I called XieGu and will follow up next week. Does anyone know if the 891 has this feature?

BH2VSQ

feng I think Yaesu might have this feature. My 817 can do it; just cut the power when you turn it on, and it will automatically start up the next time you power it on.

BD4MCG

feng Immediately switch to the 891.

BI4IVE

Immediately switch to the 891.

feng

Does model 891 have this feature?

Liridice

feng 891 is fine. If it loses power during startup, it will automatically restart when power is restored.

BA7JKX

Perhaps we could find a suitable "finger robot."

BH7HCU

BA7JKX This is really useful.

BI3TRT

It's possible to modify the circuit so that it simply turns on when a button is pressed. All you need is a relay, but it might be a bit complicated.

BH9FPK

Then don't turn it off.

BG2LNY

Modifying the circuit will affect the warranty and after-sales service. An external switch for a finger robot is possible. If you really want to modify the circuit, I can provide technical guidance (I'll send you a one-cent diagram of the switch circuit).

Ethan

My G90s is always on.
It has been running for over a month.🤣

BI3AMG

In JTDX, you can enable software to automatically send a power-on command. This feature is located on the right side of Settings - Radio - Wireless Devices. You can try it out there.

Ethan

BI3AMG
The G90s works perfectly.🤣

BI3AMG

Ethan 快建议协谷更新固件加上🤣

闽ICP备2021006864号-7

闽公网安备35020602002794号互联网举报中心

用户协议隐私政策社区规范积分规则中继规则转载须知
更新日志联系我们常见问题友情链接运营报告赞助

浩奇科技（厦门）有限公司

是无线电，把我们联系在一起