QuanSheng UVK5/K6 Latest Full-Featured Firmware [Fully Translated Version]

franxx

GZPFO The "flash" function should be disabled, and only the default setting should remain. This also applies to my newly installed device.

GZPFO

franxx Thank you for sharing! Yes, that's right...

GZPFO

YAOQI Yes, some functions can be configured, but the original firmware's flashing and alarm features are no longer available. This is likely due to space constraints. Thank you!

YAOQI

GZPFO Please, don't hesitate.

William

I flashed the H firmware (version K6 green) onto my device, and when I turned on the radio, it immediately crashed. The HS firmware works fine.

William

I flashed the H firmware (version K6 green) onto my device, and when I turned on the radio, it immediately crashed. The HS firmware works fine.

BI1UTH

William By default, firmware version 129 disables the radio function. This needs to be set in the customized firmware before flashing a new firmware.

Victor

LoseHu Hello, I updated to the latest firmware version 129. Why doesn't the type-C charging port have an indicator light?

ppyyf

Victor

Have you tried using a different charger or charging cable?

It might be related to the charging head. I have a K6 129 firmware, and it doesn't recognize or charge with a fast-charging head, but it works fine with a standard 5V 1A charger.
The indicator light is blue.

Victor

ppyyf Thank you, I replaced the original iPhone 5s head with a new one, and also replaced the cable. Now it has a blue light.

William

BI1UTH Thank you for the reply. I've learned a new pose.

lixiaosi

Has anyone encountered any issues after upgrading to firmware version 129? If so, could you please let me know?🙏

ppyyf

Version 129h – I downloaded and used it immediately, and didn't notice any problems.

BI1TPU

ppyyf Do you have a large or small memory? Are you using a word list?

BI1TPU

I'm using k6 with no scaling, and when I run the script that uses 129, it always produces garbage output. Can anyone explain why this is happening?

YAOQI

BI1TPU Update the dictionary.

BI1TPU

YAOQI I tried flashing it, but it didn't work. I can only use a custom firmware, and my memory is too small.

YAOQI

BI1TPU
用这个网页工具试试
https://k5.vicicode.com/#/tool/chi

BI1TPU

YAOQI Which version are you using? Thank you.

YAOQI

BI1TPU My K6 is the unexpanded version, with smaller storage. I initially flashed LOSEHU129.bin, but after comparing, I found that the receiving ability of version 0.12.6 was slightly better. So I reverted to flashing LOSEHU126.bin.

BI1TPU

YAOQI 我也刷个试试

BI1TPU

YAOQI 12.6和12.9功能一样吗

闽ICP备2021006864号-7

闽公网安备35020602002794号互联网举报中心

用户协议隐私政策社区规范积分规则中继规则转载须知
更新日志联系我们常见问题友情链接运营报告赞助

浩奇科技（厦门）有限公司

是无线电，把我们联系在一起