昨天把本地中继通联的日志整理成adi文件上传到QRZ.COM，发现频率识别异常。 adi日志里面上行频率是144.130，下行频率145.670（如下图一）。长传到QRZ.COM后，上行频率识别成了144.100，下行频率145.600（如下图二）。请问这种情况有没有友台遇到过。 [upl-image-preview uuid=4222d221-7392-4d5d-b886-4642c1308ba2 url=https://storage.hamcq.cn/2025-07-02/1751415704-83539-image.png alt={TEXT?}] [upl-image-preview uuid=a1171bc0-fd5b-4e05-9759-43b7c0023eb3 url=https://storage.hamcq.cn/2025-07-02/1751415655-702789-image.png alt={TEXT?}]

把这个5改成6再上传看看，这个应该是有效字符位数的意思。 [upl-image-preview uuid=83a08875-2d4f-4dc7-99a7-b11ae3eb95e7 url=https://storage.hamcq.cn/2025-07-02/1751448385-697116-8at7gbvd.png alt={TEXT?}]

楼上说的没错。冒号后面的数字是指后面的内容长度，如果像你这类145.670这样的信息，需要把前面的数字改成7 （6位数字+1个小数点）。同样的逻辑，你ADI文件的一些其它信息也需要修改，如band_rx需改成2。

p.s. QRZ.com 不会确认中继，站方认为有“辅助性质”参与的 QSO 都不算 QSL，也不能计数以获取奖状（包括互联网通联如 MMDVM、卫星通联），除非改直频。 > Since the beginning of the QRZ awards system, contacts that were relay or repeater assisted, and now internet assisted, have not been eligible for awards. For this reason, confirmations for such contacts were not implemented. ref https://www.qrz.com/docs/logbook30/assisted-confirmations

感谢各位回复，问题已经解决。

How to resolve an abnormal frequency identification error when uploading ADI logs to QRZ.com?

CQ-BG8LTU

Yesterday, I compiled the logs from my local repeater (using the term "repeater" as it's understood in amateur radio) and uploaded them as an ADIF file to QRZ.COM. I found that the frequency identification was incorrect.
In the ADI log, the uplink frequency is 144.130 MHz and the downlink frequency is 145.670 MHz (as shown in Figure 1).
After transmitting to QRZ.COM, the received frequency was identified as 144.100 MHz (downlink) and 145.600 MHz (uplink), as shown in Figure 2.
Have you encountered a similar situation with another station?

BG6QED

把这个5改成6再上传看看，这个应该是有效字符位数的意思。

BI1WIA

The person upstairs is right. The numbers after the colon refer to the length of the following content. For example, if you have information like "145.670", you need to change the first number to "7" (6 digits + 1 decimal place).

Using the same logic, other information in your ADI file also needs to be modified, such as changing "band_rx" to "2".

BG2ELG

P.S. QRZ.com will not confirm QSOs involving repeaters, and the operators believe that any QSOs with "auxiliary" participation do not count as QSLs and cannot be used to obtain awards (including internet-based systems like MMDVM or satellite communication), unless the direct frequency mode is used.

Since the introduction of the QRZ award system, contacts that relied on repeaters or other assistance (including current internet-assisted contacts) have not been eligible for awards. Consequently, confirmation procedures for these types of contacts were not established.

ref https://www.qrz.com/docs/logbook30/assisted-confirmations

CQ-BG8LTU

Thank you all for your responses; the issue has been resolved.

闽ICP备2021006864号-7

闽公网安备35020602002794号互联网举报中心

用户协议隐私政策社区规范积分规则中继规则转载须知
更新日志联系我们常见问题友情链接运营报告赞助

浩奇科技（厦门）有限公司

是无线电，把我们联系在一起