我的卡片填的都是己方，但看到有友台寄送的卡片填的是我的设备情况。B站的视频说的也是填己方。想问问各位大佬，到底哪种填法规范？

——我知道你用的是什么设备喔~ ——猜猜我用的什么设备？

@"BG5CVB"#p66341 > 本次通联，没有抄收到你的设备天馈，我通过网络开盒、人肉搜索的手段，得知你刚拿呼号，家里是土豪，在微信与李*四聊天时被误导，刚入门就在淘宝的某经销商上买美版705当对讲机用，还买了个钻石的大苗子，而且入门者通常使用最大功率发射，于是我把这些信息写到了准备寄给你的QSL卡片上……

> LK0075 法规和国际业余无线电惯例要求业余电台日志记载的必要基本内容是： A.通信时间、通信频率、通信模式、对方呼号、双方信号报告由此可知，设备和天线信息不是无线电通联和记录的必要信息，QSL卡中这一栏要么空着要么记发卡人的。

试想一下：我收到了一堆QSL卡片，上面写的都是我自己报给对面的设备天馈功率信息，那这些信息有什么用呢，难道别人比我更了解我自己的情况吗。我想要了解的是对方使用的设备天馈功率，以便结合双方台址综合判断当时的传播情况。另：截至目前我收到了许多FT8通联的QSL卡片，但大多数人（90%以上）在发给我的卡片上写的信号报告都是“rst_sent”，也就是我收到对方的信号之后根据信号强度给对方发回去的反馈。但实际上我认为应该填写的是“rst_rcvd”，也就是对方收到我的信号之后根据信号强度给我发回来的反馈。

@"Bg2gKg"#p66348 报了一半信号报告传播下去没了日志里没写还违法了？

@"BG5ELQ"#p66381 > 第三十六条使用业余无线电台的单位或者个人应当如实将通信时间、通信频率、通信模式和通信对象等内容记入业余无线电台日志并保留2年以上。希望新题库把这个也改对了

我写的是我自己的设备, 天馈和功率, 信号报告写的是通联时报给对方的. 印象中书上也是这么写的.

@"BG5ELQ"#p66381 逻辑应该是“未完成基本信息交换的不应该作为有效通联记入日志”

@"Hydroxide"#p66390 法规规定的日志内容没有信号报告，但是没有信号报告一般不记做有效通联

国外一般是用我方接收对方信号时的主观感受，现在假设我跟B00IRU建立了通联。我发现听他信号断续，还有背景噪音，但依旧能听出来说的是啥，可能因为我们都用汉语沟通的因素，因此我给出了他54的主观评价。然后他报告我的信号是48，很勉强能听出来。我在日志里的记录是： | Date | Time | Frequency | Mode | Call Sign | RST | Comments | | -------- | ------- | ----- | ------ | ------ | -------- | ------- | | 0521 | 0735z | 14.250 | SSB | B00IRU | 59 - **48** | IRU 100th Anniversary from China | （表格格式参考ARRL Logbook Mini）注：RST的两个数字，前面的59是我发送的，也就是我肯定按最高标准发送，所以是59。后面的数字是**对方回报给我的主观信号评价**，这里就是48。那么我给对方的QSL卡片是 [upl-image-preview uuid=2a5568e8-98ad-42b0-b8d8-181e7f0b6c8a url=https://storage.hamcq.cn/2025-05-03/1746257246-842558-2025-05-02-02-12-06.png alt={TEXT?}] | CONFIRMING QSO WITH | DAY | MONTH | YEAR | UTC | MHz | RST | MODE | | -------- | ------- | ----- | ------ | ------ | -------- | ------- | ---- | | B00IRU | 21 | May | 2025 | 0735 | 14.250 | **54** | SSB | 希望用这个实例能解答楼主的疑问

On a QSL card, which should be filled in for the equipment, antenna, and power level – my side or the other side?

BA4THK

The cards I filled out all contained my information, but I noticed that some cards sent by other stations contained information about my equipment. The video on Bilibili also mentioned filling in your own information.
I would like to ask everyone for clarification on which filling method is considered standard.

BG5CVB

—I know what device you're using!
— Can you guess what device I'm using?

BG4IJK

BG5CVB

During this communication, I didn't receive your equipment details. Through online research and manual searching, I learned that you recently obtained a license and live in a wealthy area. While chatting with Li* on WeChat, I was misled about your situation. As a beginner, you purchased a US-version 705 as a handheld radio and also bought a large diamond seedling. Beginners typically use maximum power transmission, so I included this information on the QSL card I am preparing to send to you...

Bg2gKg

According to regulations and international amateur radio practices, a log maintained by an amateur radio station must include the following essential information:
A. Communication time, communication frequency, communication mode, calling sign of the other party, both parties' signal reports

Therefore, it can be concluded that device and antenna information are not necessary information for wireless communication and record-keeping. In this case, either the field should be left blank or the issuer's name should be recorded on the QSL card.

BG5ELQ

Bg2gKg I reported half of the signal, but it disappeared and there's no record in the logs. Is that illegal?

BG2EWI

Imagine this: I receive a pile of QSL cards, all with the transmit power information for the equipment on the other end, clearly labeled. What good are these details? Are they giving me more insight into my own situation than I already have? What I really want to know is the transmit power being used by the other side, so that I can combine this information with the location of both stations to assess the propagation conditions at the time.

Also: As of now, I have received many QSL cards for FT8 contacts, but most people (over 90%) write "rst_sent" on their cards, which means they send back a signal based on the signal strength after receiving my signal. However, I believe that it should actually be written as "rst_rcvd", which is the feedback sent back to me by the other party based on the signal strength after receiving my signal.

BG5ELQ

Article 36: Entities or individuals using amateur radio stations shall truthfully record the communication time, frequency, mode, and objects of communication in the amateur radio station log and retain it for at least 2 years.

I hope the new question bank corrects this as well.

Hydroxide

BG5ELQ The logic should be "incomplete basic information exchange should not be recorded as a valid communication."

BG6HVC

I am writing about my own equipment, including its transmit and receive capabilities, and the signal reports are those I provide to Comlink. My impression is...<Amateur radio communication>The book also states this.

BG5ELQ

Hydroxide The log entries specified in the regulations do not include signal reports, but the absence of a signal report generally does not indicate a valid communication.

NB6G

In the past, we typically used our subjective assessment of the other party's signal when receiving their signal. Now, let's assume I have established communication with B00IRU. I noticed that his signal was intermittent and contained background noise, but I could still understand what he was saying, likely due to the fact that we were communicating in Chinese. Therefore, I gave him a subjective rating of 54. Then, he reported that my signal was rated as 48, which was barely audible. My log entry reads:

Date	Time	Frequency	Mode	Call sign	RST	Comments
0521	0735z	14.250	SSB	B00IRU	59 - 48	IRU's 100th Anniversary from China

(Refer to the ARRL Logbook Mini format)

Note: The two numbers for RST, the first one (59) is the one I sent, which means I definitely transmitted it according to the highest standard, so it's 59. The second number isThe other party provides feedback on my subjective rating.Here it is: 48.

So, the QSL card I sent to the other person was...

VERIFYING CONTACT WITH	DAY	MONTH	YEAR	UTC	MHz	RST	MODE
B00IRU	21	May	2025	0735	14.250	54	SSB

I hope this example will answer the original poster's questions.

BA4THK

总结各位友台的回复：
QSL卡片上的“设备”“天线”“功率”栏应填写己方情况

BI4TNK

Your QSL card has been received, but I don't have your address. Could you send it to me by email? My email is:543173400@qq.com

BD4UNH

I didn't read properly.

The book "Amateur Radio Communication" by Tong Xiao-yong mentions it.
Of course, it's your own device. If you need to fill in information about the other device, you can do so in the "Notes" section.（RMKS）One column.

闽ICP备2021006864号-7

闽公网安备35020602002794号互联网举报中心

用户协议隐私政策社区规范积分规则中继规则转载须知
更新日志联系我们常见问题友情链接运营报告赞助

浩奇科技（厦门）有限公司

是无线电，把我们联系在一起