状况如题所示，设备泉盛K6，接收别的对讲机信号的时候都正常，只有这某一个信号（有哑音），接受的时候会闪断闪续，只有开监听才能正常接收。信号场强显示有-70，不是信号弱的原因，是对方设置了什么吗？是开了跳频吗？（我没用过跳频，所以不懂开了会有什么效果）

补充：不是像中继台上断续那种一段一段的。而是：K6的接收灯是无规则闪烁状。

@"BG2GRY"#p63706 自己设备没问题，那会不会是对方设备有问题？有机会用其它设备接收，如果还是同样问题，那就让对方让原因了

可能是个中继，他的信号到中继太差了

可能是对方到中继的信号太差了，然后就断断续续的了

@"BD1ABP"#p63718 我还真没试过用其他设备接收，等一下我试试

@"BI1JNP"#p63727 不像是中继，我听他们这个频率上不同人说话的场强是不同的，但所有人说话都是断续的。

@"Ubuntu"#p63755 不像是中继，因为他们每人说话我这显示场强都不同，-70到-100的都有

@"BG2GRY"#p63768 中继转出来的信号一样有强弱，在losehu上表现为场强不同

@"HeyCharlie"#p63774 中继发射功率还会变的？

@"BG2GRY"#p63706 看您描述，开了监听就正常。可能是静噪阈值设置的比较高可以看看固件有没有调整这个值的设置，降低些试试

Has anyone experienced a situation where they received a strong signal that was intermittent? What could be causing this?

BG2GRY

As the title indicates, when using the QuanSheng K6 device, it functions normally when receiving signals from other radios. However, when receiving this specific signal (with static), the reception becomes intermittent and unstable. The only way to receive the signal properly is to turn on the listening function. The signal strength indicator shows -70 dBm, which indicates a strong signal, not a weak signal. Could it be that the other radio is using frequency hopping? (I haven't used frequency hopping before, so I don't know what effects it has.)

BD1ABP

BG2GRY My own equipment seems to be fine, so could it be that the other device has a problem? If I have another device available, and if I still experience the same issue, then I'll ask them to investigate.

ppyyf

BG2GRY Based on your description, it seems to be working normally once you enable monitoring. The possibility is that the noise threshold setting is set too high. Please check if there's a setting in the firmware to adjust this value and try lowering it.

BG2GRY

P.S.: Unlike the intermittent, sporadic signals from a repeater site, K6's receiving light is in a completely irregular flashing pattern.

BG2GRY

BD1ABP I haven't tried using other devices yet. Let me try it with this one first.

BI1JNP

It might be a repeater; its signal to the repeater is very weak.

BG2GRY

BI1JNP It doesn't seem to be a repeater; I can hear different people talking on that frequency, and their signal strengths are different, but everyone's speech is intermittent.

Ubuntu

The signal might have been too weak to reach the repeater, resulting in intermittent communication.

BG2GRY

Ubuntu It's not like a repeater, because when I speak, the signal strength I receive is different for each person, ranging from -70 to -100.

HeyCharlie

BG2GRY The signals transmitted by the repeater have both strong and weak characteristics, which are manifested as different field strengths on Losehu.

BG5ELQ

HeyCharlie Does the transmitting power of the repeater also vary?

Ubuntu

HeyCharlie Scratching head

HeyCharlie

BG5ELQ I'm not entirely clear on the specifics, but there is definitely a difference. I've operated many repeaters in Chengdu, and also the original Lhasa repeater – they were all different.

BG2GRY

ppyyf The static noise I'm experiencing on channel 2 seems unrelated to the other channels, which I can receive with good signal strength (-110). However, within this specific channel, all voices are intermittent and the signal strength is around -70.😓

闽ICP备2021006864号-7

闽公网安备35020602002794号互联网举报中心

用户协议隐私政策社区规范积分规则中继规则转载须知
更新日志联系我们常见问题友情链接运营报告赞助

浩奇科技（厦门）有限公司

是无线电，把我们联系在一起