BG9PQO 前段时间买了块热点小板，可以通过电脑使用bluedv数字通联，理论支持手机otg连接bluedv软件使用，但在安卓端始终没有设置成功，似乎是需要tcpuart软件，但是没有搞清楚原理，有没有哪位大佬使用过能指点一二
BH6RZW 是的，需要安装tcpurat，tcp端口选择200，bluedv安装不带ambe的版本，先打开tcpurat，点击连接，允许访问usb设备，再点击连接tcp，保持后台运行，后面就打开bluedv，设置好呼号，发射接收频率，bm服务器密码什么的，enableser2net，IP填写127.0.0.1，设置好点击连接，显示connect后，点击电话就可以了
BG9PQO BH6RZW Thank you for the reply, but I still haven't been successful. I am using a small mmdvm board. Could you please tell me what baud rate setting is used in the UART software? All my settings seem to be correct, but I am not receiving any signal from the handheld transmitter.
BH6RZW BG9PQO For that, I use 115200. Can you check if there's any data stream in the tcpUART section? Also, could you capture a BLUEDV image and see if there are any apparent issues?
BH6RZW BG9PQO Additionally, if the `tcpuart` software cannot connect via USB, it may indicate that the motherboard firmware does not support it. I have two boards; one connects successfully, while the other does not.
BG9PQO BH6RZW This time it worked! It seems like the issue was related to Port settings. Thank you for resolving this problem that has been bothering me for a long time.
闽ICP备2021006864号-7
闽公网安备35020602002794号
互联网举报中心