请问大佬们，你们的馈线是怎么穿出窗的？是直接伸出去，用窗夹住吗（那不会有一条缝吗，马上夏天了，怕蚊虫进来啊，也怕冷气跑了），各位有啥办法吗，咋排馈线才能让缝小一点啊。我又不想把天线放家里，那样效果太差了....... 求助！求助！

东北是平开窗，窗框内有密封胶条，用50-1.5馈线不影响关窗。

@"Liridice"#p59828 我这南方啊，推拉窗，压紧了以后线会折

@"Syryia"#p59824 也是个办法

@"Lonetrail-BG7RFV"#p59823 我们家空调墙孔已经被封起来了😭

@"BG7XSS"#p59815 在哪打孔，没经验，不敢打，能给个图不，谢谢了

@"BD4WCL"#p59839 胶泥封的话可以揭开一点

找打空调孔的打一个4分管粗细的就行，穿好馈线后灌入泡沫胶封好。建议多放几根馈线，以备后来增加设备用。

Problems with installing an antenna on the balcony.

BD4WCL

Hey everyone, how do you guys get the feed lines out of the window? Do you just extend them and use clamps (would that create a gap, and with summer coming soon, I'm worried about mosquitoes and losing cool air)? Are there any ways to route the feed lines so that the gap is smaller?
I also don't want to put the antenna inside my house; the signal would be too weak there...
Help! Help!

Lonetrail-BG7RFV

BD4WCL Air conditioning wall hole

YofoaStudio

空调管道？

BD4WCL

YofoaStudio Simple and effective.

BG7XSS

Drilling holes in window frames

BD4WCL

BG7XSS I'm not sure where to drill, and I have no experience doing so. Could you provide a diagram or illustration? Thank you.

BD4WCL

Lonetrail-BG7RFV The holes in my wall where the air conditioner used to be have been sealed up.😭

Liridice

In Northeast, the windows open outward, and the window frames have sealing strips. The 50-1.5 cable does not affect closing the windows.

BD4WCL

Liridice In my area in the south, when I pull and push on the window frame after tightening it, the wires inside will often get bent.

BD4WCL

Syryia It's also a viable option.

Lonetrail-BG7RFV

BD4WCL If the clay sealant has been applied, it can be peeled off a little.

BH5UQJ

BD4WCL

Lonetrail-BG7RFV No, my sliding windows at home don't have any seals...

bg2kud

For drilling the air conditioning hole, use a 4-inch diameter pipe. After connecting the feeder lines, fill it with foam sealant and seal it properly. It is recommended to install multiple feeder lines for future expansion of equipment usage.

BD4WCL

bg2kud Can I install another one? There's already one in the room, and my family probably wouldn't allow it. I was thinking about running the cable through the same hole. First, remove the existing adhesive and then run the cable through before sealing it up.

BI1MXY

I pressed on one of the window screens, the kind with a zipper; I pressed it, and the fishing rod antenna extended out. Then I zipped up the zipper, and there was no gap left.

BG8KUQ

In my home, I have sliding windows that open horizontally. I've enlarged the in and out drainage holes slightly and used a 50-3 line.

BD4WCL

BG8KUQ I originally planned to do it this way. Now that it's finished, I'm running the cable directly through the hole in the air conditioner unit. Fortunately, when we installed the air conditioner, we didn't install it too tightly, and there was a gap that allowed me to run the cable through.

BH9FPK

When I first started drilling the hole through the wall, the "M" head wouldn't fit. I used a pry bar to try and adjust it for a long time, but last year I installed three feeder cables (220V + 485V) directly into the existing outlet, and then drilled an 80mm hole.

BD4WCL

BH9FPK Playing with radio means constantly tinkering and experimenting.

BI7CUX

BD4WCL 装修也是业余无线电

闽ICP备2021006864号-7

闽公网安备35020602002794号互联网举报中心

用户协议隐私政策社区规范积分规则中继规则转载须知
更新日志联系我们常见问题友情链接运营报告赞助

浩奇科技（厦门）有限公司

是无线电，把我们联系在一起