I'm looking for a convenient charger that can charge a PDC680 battery.

BG2EFX

看黄鱼有老师给PD系列做了款，3D打印，触点接触，滑倒固定，看起来很好用
基本可以弥补海能达机器没有快捷充电，或者车载充电的空白。
我现在日常用机是PDC680，问了那位老师他没有PDC680 所以也不能开模
不知道各位知不知道类似的产品，这样出门或者在车上就能充电了。。。。。

BG2GFC

BG2EFX The Hytera PDC680 did not provide any information about the charger.
Although my suggestion is that it's best to use the official, original charger seen on Xianyu, which shows a 12V 2A output, perhaps I should just buy a new power supply.
The price of "咸鱼上座" (Xianyu Shangzu) is 280 RMB.😭

BI1UCA

BG2EFX Oh! That's interesting. I know that the PD series has this car charger feature. But, I'm not really sure about PDC. (￣～￣;)

The problem is that finding PD980 series parts is difficult. (￣～￣;)

BH6BMJ

Draw a circuit board yourself, add a voltage reduction circuit and rectifier chip, then connect batteries in series.

BG2EFX

BG2GFC
Yes, there are teachers who create PD-based yellow fish products. When asked about parameters, they said that 12V input and 1A-2A is fine. But 8.8V will not work.
The teacher couldn't do it because he didn't have the necessary equipment.

BloodBlade

If you have a 3D printer, you could try experimenting with different sizes to find the right fit for the track. For the other parts, I think using standard components should be fine.

BH6RZW

I'll buy a universal one; I saw them on Xianyu, so I bought one. It's too much trouble to carry my own charger.

BG2EFX

BH6RZW Do you have any photos of it in use? If so, I wouldn't need to carry around a bunch of batteries when I go out.

BI1UCA

This network card just sent out 4 messages. (´･_･`)

BG2EFX

BI1UCA Someone will definitely come up with a PDC, and there will be a market for it.

BH6RZW

BG2EFX
I've tested it myself, and the voltage and ripple are quite stable.

BH6RZW

BG2EFX
I've tested it myself, and the voltage and ripple are quite stable.

BH6RZW

BG2EFX
I've tested it myself, and the voltage and ripple are quite stable.

BG2EFX

BH6RZW Can I use this to charge a PDC680 battery?

BH6RZW

BG2EFX As long as the voltage is 8.4V, the distance can be adjusted.

BG2EFX

BH6RZW Purchase link?

BH6RZW

BG2EFX Small yellow fish universal radio charger

BH6RZW

BG2EFX Small yellow fish universal radio charger

BG2EFX

BH6RZW 680 This battery... it seems like it's not compatible with this TYC version. I see that the charging station is 12V, the battery is rated at 7.7, and the charging limit is 8.4. These are some strange parameters.

BG5ELQ

BG2EFX 3.85V battery, 2S fully charged to 8.8V. Charging with 8.4V will not work, but it won't prevent charging altogether.

BH6RZW

BG2EFX 只要电池是7.7的，8.4电压应该都能充，我的780也写了12v，应该指的是充电头12v 座充那里写了输入12v，没写输出，我猜也是8.4

BG2EFX

BG5ELQ 嗯下单了TC的~ 老板也说了就是充不满但是带出门能用就行又不是不能用

闽ICP备2021006864号-7

闽公网安备35020602002794号互联网举报中心

用户协议隐私政策社区规范积分规则中继规则转载须知
更新日志联系我们常见问题友情链接运营报告赞助

浩奇科技（厦门）有限公司

是无线电，把我们联系在一起