Today, I accidentally browsed the YAESU website and discovered that the new firmware for August 2023 has been released.
The following firmware updates were applied to three units: the main firmware, the display firmware, and the DSP firmware. The SDR and AF firmware remained unchanged.
• MAIN: V01-13 /FTDX10_MAIN_V0113.SFL 8/1/23Update)
• DISPLAY: V01-05 /FTDX10_DISPLAY_V0105.SFL 8/1/23Update)
• DSP: V01-20 / FTDX10_IFDSP_V0120.SFL 8/1/23Update)
• SDR: V01-00 / FTDX10_SDR_V0100.SFL, 4/7/21
• AF: V01-00 /FTDX10_AFCPU_V0100.SFL 4/7/21
The main update and improvement contents are as follows:
- Supports USB mouse wheel operation
- Supports individual TX/RX oscilloscope level settings.
- Add RX IF bandwidth functionality (for SSB, CW, RTTY, PSK and data), with a maximum of 4000 Hz.
- The parameter "50 steps" has been added to "MPVD steps/cycle".
- Fix storage channel list error
- Fixed the issue with the attitude indicator.
- Fixed SD card operation error.
- Further improvements and optimizations have been implemented.
Here's a link to the shared drive for easy downloading:
Upgrade Instructions: https://wwxx.lanzoue.com/iX4L715e79vi
Firmware version: 202308 https://wwxx.lanzoue.com/ixAU915e7a0d
Disclaimer:
1. I have upgraded, and currently all devices are functioning normally. I have not yet tested all of the improvements or upgrade features.
2. Users are responsible for any risks associated with firmware upgrades.
3. Please refer to the original manufacturer's upgrade instructions for the upgrade steps. I am only responsible for moving it.
闽ICP备2021006864号-7
闽公网安备35020602002794号
互联网举报中心