Liridice BG5VCU-VK2VCU-AK6CU Does this issue have a deeper root cause? My computer works fine with the FT-710 at 48000 Hz.
BG5VCU-VK2VCU-AK6CU Liridice I haven't been able to uncover the deeper reasons… Is your output set to 48000 Hz and is it working normally?
Liridice BG5VCU-VK2VCU-AK6CU Yes, I just confirmed that I have always been using 48000 Hz, but it works fine even when set to 44100 Hz.
bh1cqz BI1MXY There are several possible reasons why a transmitter might have no power output, and this is something I recently experienced and resolved. The settings were correct, but the links to "alive" and "dead" were not working. Clicking on "cat" resulted in an error message. The solution was to recharge with 710, after which it suddenly worked (the "reset method" is amazing). Link Chen sent a signal with only 5 watts, outputting 3.5A. The computer had a problem; the microphone needed to be selected and fully opened, then all devices should be shut down and restarted. Now it's transmitting at 91W, 17.5A. In summary, you need to configure the sound card on your computer for it to work properly. If you encounter any issues that prevent you from getting to the end, try resetting it.
bg8swr I've encountered similar issues before, and the solution was to reinstall the driver. Make sure you install the driver provided on the official website, not the one that came with your system.
BA4RCM BG6HVC Hello, are you okay now? My FT-891 also disconnects immediately after transmitting on 7300.
闽ICP备2021006864号-7
闽公网安备35020602002794号
互联网举报中心