本人有一台G90S，使用JTDX软件控制，我看到设备选项列表里有G90这个选项，但是选上之后却无法和电台正常通信，点击“测试CAT”按钮，电台的屏显频率会跳几下，最后电脑显示与电台通信失败。协谷官方给出的设置范例https://www.cqxiegu.com/newsinfo/839605.html里却是选择的Icom IC-705，换成这个就可以正常使用了。那JTDX里面的G90是怎么回事，为什么不能用呢？还是说我哪里设置得不正确。

是不是比特率没设对？90是19200

@"BG9CHE"#p48943 不应该呀，我也是设置的19200，还是说其他几项有设置不对的地方呢

@"BG6OQI"#p48927 哎，那好奇怪呀

补充一下，这个是我选择IC-705时能正常使用的设置参数，当我把无线电设备切换成G90时其他选项都不改动，结果就不行了。 [upl-image-preview uuid=04937d90-76aa-4b11-a65a-2e05f6081e1d url=https://storage.hamcq.cn/2025-01-06/1736126730-10936-image.png alt={TEXT?}]

@"BG2EWI"#p48948 那就奇怪了，本人G90N，选择G90设置没有问题。要不后面您在咨询下协谷官方售后吧

G90N电台使用JTDX选择G90选项同样问题，选择IC-705功能一切正常，同时在使用JTDX还遇到以下情况，使用大部分人推荐的OmniRig软件同样报错，换用flrig无任何问题，并且功能更丰富，还是多尝试，看协谷固件更新内容很多都是针对FT8修复或者改善的，也许固件不同遇到情况就不同，灵活使用

@"BG9CHE"#p48972 原来如此，这么说我还真有必要问一下

@"BI1SFC"#p49058 原来如此，学习了

补充一下，我的机器固件版本主机：v1.79 机头：v1.80

Problems with settings for G90S in JTDX

BG2EWI

I have a G90S, which I control using the JTDX software. When I look at the device options list, I see an option for "G90", but when I select it, I can't communicate normally with the radio. When I click the "Test CAT" button, the radio display shows a few different frequencies, and then the computer displays a message indicating that communication with the radio failed. The example configuration provided by XieGu is: https://www.cqxiegu.com/newsinfo/839605.html, which specifies using the Icom IC-705. When I switch to this, it works normally. What's going on with the "G90" in JTDX? Why can't I use it? Or is there something wrong with my settings?

BG6OQI

I can use ~

BG2EWI

BG6OQI Well, that's really strange.

BG9CHE

Is the bitrate not set correctly? 90 is 19200.

BG2EWI

BG9CHE That shouldn't be the case. I also set it to 19200, or are there other settings that I might have configured incorrectly?

BG9CHE

BG2EWI That's strange, as I am using a G90N and setting it to G90 works fine. If you have any further questions, please contact XieGu official after-sales service.

BG2EWI

To clarify, these are the settings I used when initially setting up my IC-705. When I switched the radio to G90 mode without changing any other options, it didn't work.

BG2EWI

BG9CHE That's true. I actually need to ask you about that.

BI1SFC

When using the G90N radio and selecting the "G90" option in JTDX, I encountered the same issue. When using the IC-705, all functions work normally. However, when using JTDX, I also experienced the following: The OmniRig software, which is recommended by most users, also produced an error. Switching to flrig did not cause any problems, and it offers more features. It's best to try different options and see what works best for you, as many XieGu firmware updates are focused on fixing or improving FT8 functionality. The specific issues may vary depending on the firmware version, so flexibility is key.

BG2EWI

BI1SFC I see now, I've learned.

BG9CHE

BI1SFC I was able to use my 90N on the JTDX with the G90 mode without any issues. Could it be a problem with the connection method? I'm using a XieGu DE-19 to connect the radio and computer, and I have a USB cable with 6 magnetic contacts connected to the computer side.

BG9CHE

BG2EWI Could it be an issue with the connection method? I'm using a XieGu DE-19 to connect the radio and computer, and I have a USB cable with 6 magnetic contacts on the computer end.

BG2EWI

By the way, my machine's firmware version is:
Host: v1.79
Head: v1.80

BI1SFC

BG9CHEI'm making my own ACC line to 4-pin 3.5mm connector, and I've been researching the issue of RF interference on USB. I can choose to use a USB isolator, which provides full isolation for power and data. This eliminates the need for any magnetic rings. The more I research, the more I realize that I need to learn and buy more things.

BG2EWI

BG9CHE I don't think so, the XieGu official box contains a serial port chip, and this one I made myself also contains a serial port chip. Therefore, the principles should be the same.