BH3XZT 如上图 设备：icom705 连接软件：Icom Remote Utility 问题发生情况：在打开JTDX软件正常通联时，使用大波轮改变频率，或改变电台设置时，100%触发以上图片情况，另有概率触发以下情况 设备使用FT8通联时，设置在VFO模式，（非memo及call模式） 求助各位705用户，如何解决以上问题
BI4OAE Personally, I believe that changes in frequency are responsible for the observed variations in standing waves. The conclusion is that more magnetic rings should be added to the control line and feed lines.
BH3XZT By the way, I need to add that in order to avoid USB connection instability (disconnections), my IC-705 is connected to the computer via Wi-Fi (using the Icom Remote Utility).
Liridice Have you tried using different versions of JTDX or switching to WSJT-X to see if that resolves the issue? It might be a problem with the Hamlib.dll version.
BH3XZT It appears we have found a potential solution to the problem. After trying, it seems like there are no more errors.
闽ICP备2021006864号-7
闽公网安备35020602002794号