Urgent request: I need help clearing the EEPROM data on the QuanSheng UVK6 using K5web.

Wumiaobb

泉盛uvk6在k5web上清空了eeprom数据，没有备份，现无法进入刷机模式，功能不正常，求解决办法

BH4HZD

Wumiaobb The simplest option is to return it for repair at the factory.

Wumiaobb

BH4HZD Are there any methods that don't involve returning it to the factory? Would it be possible to use a different machine to flash it?

BH4HZD

Wumiaobb Please describe the problem in detail. What exactly is happening? Does it turn on and display something, or does it not turn on at all? Can you connect to k5web? Are you able to enter recovery mode by holding down the power button and pressing volume up/down?

Wumiaobb

BH4HZD I have already sent it to someone for repair.

BI9BWT

You can't even get into recovery mode anymore, so the firmware won't be useful either.

BH4HZD

Disassemble it and connect a ST-Link to see if I can get it connected.

Sharkbia

The flashing mode operates under the guidance of the MCU and is independent of EEPROM; clearing the EEPROM will not affect the bootloader.

闽ICP备2021006864号-7

闽公网安备35020602002794号互联网举报中心

用户协议隐私政策社区规范积分规则中继规则转载须知
更新日志联系我们常见问题友情链接运营报告赞助

浩奇科技（厦门）有限公司

是无线电，把我们联系在一起