Version number: V3.07
1. Add a monitoring mode for each digital channel. When this mode is enabled, the channel's color code can be mismatched without affecting its ability to receive calls.
2. Add a channel ID to each channel. This can be done in the corresponding channel menu under "Channel Settings".>[Channel ID]: Change the channel ID in [Channel Settings] ->[Channel ID Selection] Choose to use your device's ID or the channel ID when making a call.
3、 In the simulation channel settings ->[Tail-end noise reduction] – Adds different tail-end options (55Hz / 120° phase shift / 180° phase shift / 240° phase shift)
4. Change the memory driver to be compatible with both 25Q256 and 25Q512 (The memory IC needs to be replaced by the customer; the factory standard is 25Q128).
5. Add an SSB receiving option to simulate channel reception.
6、The digital UHF operating frequency range has been extended to 400-520 MHz.
7. The key definition function now includes two new features: area selection and numeric monitoring mode.
8. Press and hold the "0" key to turn on the device, wait for 3 seconds, and you can restore the write frequency data. When data loss occurs (both the red and green lights are lit), you can use this function to recover the data.
闽ICP备2021006864号-7
闽公网安备35020602002794号
互联网举报中心