刚入门玩短波，问一下关于通联频率的低级问题。如果我在14.270叫到了人，后面我们在14.280完成了QSO，最后填写的日志的时候，是填写14.270还是14.280。对于这个有没有约定俗成的要求？

@"YofoaStudio"#p41501 就是说这里需要俩人来约定？

@"BI4MIG"#p41505 相当于你告诉他我是在哪个频率记录的qso，不过一般来说都是记录最后确认的那个

@"CQ-BG8LTU"#p41490 都QSY 280了肯定是280啊~

14.280吧通联已经转到了14.280，可以填写通联完成的频率楼上几位朋友提供的方法也挺好，直接互相确认好更省心

What is the preferred method for filling in the shortwave communication frequency?

CQ-BG8LTU

I'm just starting out with shortwave radio and have some basic questions about frequencies.
If I called someone on 14.270 and then we completed a QSO on 14.280, which frequency should I record in the log?
Are there any customary requirements for this?

BG2EFX

CQ-BG8LTU It's definitely QSY 280.

BG0GAA

14.280

YofoaStudio

建议73之前将你需要记录的信息告诉对方
比如说感谢xx跟我在14270上的qso啊，我这边做记录了，有机会交换qsl卡片啊

BI4MIG

YofoaStudio In other words, does this require two people to agree?

YofoaStudio

BI4MIG It's like telling him which frequency the QSO was recorded on, but generally, you would just record the one where the final confirmation occurred.

BG6HFD

14.280
The frequency has been changed to 14.280. You can now fill in the frequency completed by Tonglian.
The method suggested by some friends upstairs was also quite good; directly confirming with each other saves a lot of trouble.

闽ICP备2021006864号-7

闽公网安备35020602002794号互联网举报中心

用户协议隐私政策社区规范积分规则中继规则转载须知
更新日志联系我们常见问题友情链接运营报告赞助

浩奇科技（厦门）有限公司

是无线电，把我们联系在一起