在原版固件基础上把DMR页面改成了双时隙同时显示，在MMDVM主页增加了呼叫列表，添加了M17和POCSAG模式，还有其他一些细节的调整。 [upl-image-preview url=https://storage.hamcq.cn/2024-10-27/1730039971-566248-mmdvm-1.png] [upl-image-preview url=https://storage.hamcq.cn/2024-10-27/1730040041-797246-dmr-1.png] [upl-image-preview url=https://storage.hamcq.cn/2024-10-27/1730040045-824197-mmdvm-lh.png] 目前已知可能存在的问题：一、有用户反馈DMR模式下某些呼叫的呼号显示错误，因为原版固件是从t18.txt直接获取呼号，有时呼号会显示“DMR ID：”,推测为YSF转DMR呼叫（或者其他模式转DMR呼叫）问题。新版已改为从t0.txt获取呼号，但因没有接触到实例，不确定问题是否修复，待测试反馈。二、因DMR模式以外其他模式呼号仅能通过t0.txt获取，可能存在短呼号（如4、5位呼号）会有多余字符情况。非强迫症用户可无视。适配TJC8048X系列屏幕，后续应该会按这个模板修改TJC8048K系列和TJC4832T系列固件下载还是在百度盘，欢迎测试链接: https://pan.baidu.com/s/19FrWKRvhTgzIQMzrHmCHLQ 提取码: 7ANY

呼叫列表怎么才能转到时间显示？比较奇怪的是人自己的姓名，城市显示不完整，别人的就正常

@"BG6TON"#p38587 我就说忘记一个啥了，原来是这个😅 姓名城市显示不全可能应该是是太长被截取了，因为改成双时隙同时显示压缩了文字控件的长度

@"BI7ANY"#p38598 字库的问题，我设置了中文繁体

@"BG6TON"#p38621 好吧，为了压缩字库文件大小我只选了通用规范汉字表里的一二级字（总共6500字），繁体字应该是不全的，只能自己改字库了

更新了TJC8048X370固件，在MMDVM主页点击页面下方中间可以切换显示时间/呼叫列表，还修复了几个小BUG。添加了TJC8048K070固件，与X系列固件功能基本一致，但DMR页面没有做成双时隙。（DMR双时隙需要将国旗缩小，但受限于K系列ROM容量无法像X系列一样塞进两套大小的国旗，都用小国旗的话其他模式下国旗就会太小显得不协调，索性不做了）另外因为K系列屏幕性能不足，在主页面切换时间/呼叫列表显示的会有几秒钟的卡顿，对功能没有影响，只是影响观感…… 固件版本20241029，已上传到网盘。 BTW：改TJC4832T135固件的时候不出意外的出意外了：内存溢出。还要想办法压缩内存使用…… [upl-image-preview url=https://storage.hamcq.cn/2024-10-29/1730168506-772054-e6104bbe-0f42-45b3-ba53-f771c5739ab7.png]

@"BG6TON"#p39011 显示星期几这个似乎需要用到RTC代码，只有带RTC时钟的型号才能用，手上没设备不好测试，会尝试一下。

TJC4832T135 固件实现了DMR双时隙同时显示，代价是运行内存被我压榨到仅剩32个字节。然后因为屏幕主控频率较低，某些情况下点击操作会有卡顿，但是不影响主要功能，具体可参见网盘内的说明文档。新增了TJC8048X570固件，区别就是用RTC代码实现了星期显示，仅X5系列可用，需要先手动校准屏幕RTC时钟。新固件已上传到网盘。

为什么我的屏幕不显示时间其他都显示好好的，我的屏幕是4832k035 和8048

@"BG7XQC"#p40131 上图看看呗

New version MMDVM serial port firmware

BH8ESR

I've found the cause! I was stuck in a certain way of thinking, always looking for problems in the firmware. It turns out that the WPSD system itself also has a brightness control, and adjusting it fixed the issue! Thank you.

password

Thank you for sharing. Regarding Pi-star 4.23, I'm having some issues with certain cards. I'm not sure if it's due to the Pi or the K035 screen.

BG6TON

BI1OFX I found that the "System Information" buttons on the INFO page, which were previously unavailable, are now functional. tjc8048X550

BV7SQ

Thank you, respected person. Thank you, respected person.

BH8ESR

I'm wondering if there's a portrait-oriented version of this firmware available.

BG6TON

BH4HLI
Add a timer to the MMDVM page, set the number of seconds before returning to the clock page. Code: // Open the timer
tm1.en = 1
MMDVM.pic = 1
view tCS1,1
view tCS2,1
vis TM101, 1
vis TM100,0
vis gm1,1
Visit TMS, 0
view at x=0, y=0
Vis B1, 0
Vis B2, 0
Set bit 3 to 0.
display value 4,0
Vis B6, 0
vis gm0,1
view T101, 0
Visit T102, 0
view T103, 0
View T104, 0
Vis T105, 0
Visit T106, 0
Visit T107, 0
Vis LT1,0
vis LT2,0
vis LT3,0
vis LT4.0
Vis LT5.0
Vis LT6,0
Vis LT7,0
vis LT8,0
Vis LT9.0
vis LT10,0
Vis TS1,0
Vis TS2.0
Vis TS3.0
Vis TS4.0
Vis TS5,0
Vis TS6.0
Vis TS7.0
Vis TS8.0
Vis TS9,0
Vis TS10,0
vis Lcallsign1,0
vis Lcallsign2,0
vis Lcallsign3,0
vis Lcallsign4,0
vis L-callsign5,0
vis L-callsign6,0
vis L-callsign7,0
vis Lcallsign8,0
vis L-callsign9,0
vis Lcallsign10,0
Visit Lcountry1,0
vis Lcountry2,0
vis Lcountry3,0
vis Lcountry4,0
vis Lcountry5,0
vis Lcountry6,0
vis Lcountry7,0
vis Lcountry8,0
vis Lcountry9,0
vis Lcountry10,0
View LTG at 1.0
vis Ltg2.0
Vis LTG3,0
Vis LTG4,0
Vis LTG5,0
Vis LTG6,0
Vis LTG7,0
Vis LTG8,0
Vis LTG9.0
Vis LTG10,0
view Lsource1,0
Access Lsource2,0
view Lsource3,0
view Lsource4,0
vis Lsource5,0
View Lsource6,0
vis Lsource7,0
vis Lsource8,0
vis Lsource9,0
vis Lsource10,0
vis LHT1,0
vis LHT2.0
vis LHT3.0
vis LHT4.0
vis LHT5.0
vis LHT6,0
Vis LHT7.0
vis LHT8.0
vis LHT9.0
vis LHT10,0
Timer settings:

BH8QVL

BG6TON This code won't compile. Help!

BD8DTM

BI7ANY Dear expert, is this firmware still being updated? After the recent upgrade to WPSD, the information is incomplete. The call sign, flag, and historical content are all missing, and I can't find a solution. Please update it.

BH8ESR

BD8DTM Is my current normal operation indicative of other potential problems?

BG6TON

BD8DTM It shouldn't be related to the screen firmware; it should be a problem with the Raspberry Pi operating system.

BH8QVL

BD8DTM Solution for BI1OFX: The current version of WPSD does not, by default, configure the dedicated call sign database address for the nxdriver. Therefore, regardless of whose signal is received, this information will be displayed.
To solve this problem, you need to configure it in the ->Advanced>Complete Editor's>Two new lines have been added under [NextionDriver] in MMDVMHost:
DMRidFile = stripped.csv
GroupsFile = groupsNextion.txt

P.S.: The above operations require that you have selected one of the "Nextion enhanced driver" options in the display type settings.

BH8QVL

If the WPSD system displays an incorrect or "00.00" time, reverting to a version prior to 20241101 (inclusive) should resolve the issue!

BI3AEX

"Not found in nextionuser.csv" - Where should this be configured?

BI3AEX

BI3AEX The current Pi-Star system being used.

BI3AEX

I was wondering if you could advise me on how to find a firmware theme that hides the address below the call sign. Currently, it always displays "not found in".
Is this to update the contact list?
Could you please tell me how to operate this? I also have a Pi-Star system, and I can't find any relevant information.