uvk6青春绿4m已改4732收音机双天线4系统，cec 5，losehu132h，原厂k6，ijv 3.21。从losehu网页版刷了多系统，想单单升级ijv_3.40版本，看了半天不明白应该刷哪个固件。 firmware.N3.40.bin firmware.S3.40.bin firmware.X3.40.bin 于是先刷了x，加载ijv到96%死机又刷了s，直接开不了机了遂刷n，太好了，能正常进系统，结果又死机...... 请问大神，uvk6改4732双天线4m，单说ijv固件，最高能刷哪个呀？本着既要，又要，还要的精神，平常使用losehu132h存信道，这个版本有多普勒能打卫星。cec5来听短波，当收音机。第三个系统是原系统，最多四个第四个就是ijv了~ firmware_IJV_V3.bin ⇒ 200 channels. firmware_IJV_VX3.bin ⇒ 999 channels. This involves replacing the original 8K eeprom (24C64) with a new 128K one, such as 24M01. 但是ijv的英文实在看不懂，教程也很少，请问大神们，是不是ijv不是用来听短波的，我该怎么理解这个系统呀~ [upl-image-preview url=https://storage.hamcq.cn/2024-10-26/1729969992-665580-20241027031245.jpg]

请问大神，uvk6 ijv 固件，最高能刷哪个呀？

你刷了多固件的bootloader么? 多固件每次更换固件的时候都需要重刷所有的

@"BI7KGD"#p38561 刷了，bootloader下刷入四个系统，想问的是ijv的这三个版本区别~

VN3.xx 版本仅适用于具有原始 8K 24C64 EEprom 内存的无线电 VS3.xx 版本 12 ms 的特殊版本，适用于慢速 24M02 存储器（仅当安装了此类型时才使用它） VX3.xx 版本，适用于配备硬件修改的无线电，带有 eeprom 内存 > 64 K 24C512 / 24M01 / 24M002

New user question: I'm using the QuanSheng UVK6 with the K5 web-based iJV system, and it keeps crashing.

ash8683

uvk6, youthful green, 4m, modified to 4732 receiver, dual antenna system, CEC 5, losehu132h, original k6, ijv 3.21.
I tried installing multiple systems from the Losehu web version, but I couldn't figure out which firmware to install for a single upgrade to ijv_3.40. I looked at it for a long time without understanding.

firmware.N3.40.bin
firmware.S3.40.bin
firmware.X3.40.bin

I first tried flashing X, but it got stuck at 96% and crashed.
I tried resetting it again, but now it won't even turn on.
I successfully flashed it, great! It booted normally, but then crashed...

Hello expert, I'm looking for the best firmware to flash on a UVK6 with 4732 dual antennas and 4m. Can you recommend one that works specifically with the iJV firmware?

Adopting the principle of "both/and," this version of Losehu132h, in addition to its usual functionality, is capable of receiving signals from multiple Doppler satellites. The cec5 system can also be used for shortwave listening with a radio. The third system is the original system, supporting up to four devices.

firmware_IJV_V3.bin ⇒ 200 channels.
firmware_IJV_VX3.bin ⇒ 999 channels.

This involves replacing the original 8K EEPROM. (24C64) using a new 128K unit, for example, the 24M01.

However, I can't understand the English version of iJV, and there are very few tutorials available. Could you please advise me on whether iJV is actually intended for listening to shortwave radio? How should I understand this system?

ash8683

Excuse me, seniors, which firmware version (UVK6 and IJV) can I flash to get the best performance?

BI7KGD

Which firmware versions have you flashed the bootloader on?
With multi-firmware, a firmware update requires re-flashing all of them.

ash8683

BI7KGD I've flashed it, and I've installed four systems via the bootloader. I was wondering about the differences between these three versions of iJV.

ash8683

The VN3.xx version is only compatible with radios that have the original 8K 24C64 EEPROM memory.

VS3.xx version, with a special 12ms timing, suitable for slow 24M02 memory (use only when this type is installed).

VX3.xx version, suitable for radios with hardware modifications, featuring EEPROM memory. > 64 K 24C512 / 24M01 / 24M002

ash8683

Should the 4m 4732 be equipped with a VX3?

闽ICP备2021006864号-7

闽公网安备35020602002794号互联网举报中心

用户协议隐私政策社区规范积分规则中继规则转载须知
更新日志联系我们常见问题友情链接运营报告赞助

浩奇科技（厦门）有限公司

是无线电，把我们联系在一起