休眠了几年，跟不上时代了。请教下各位老师，在软件、各网站之间，有哪些办法实现日志的归集呢？ logger32、JTDX、N1MM等等，如何将各软件的日志自动汇总到一起呢？以及与qrz.com、lotw等等网站之间的日志同步。各软件都打开，通过TCP连接是一个方式，但是各软件打开后都会争夺串口控制权，导致报错，omnirig又不是各个软件都支持。手工操作太麻烦了，弄得比较繁琐，请教各位老师，都在用哪些好的解决方案呢？感谢各位关注与回复！

@"BG5LU"#p2812 LOGGER32 有个端口回传功能 [upl-image-preview url=https://storage.hamcq.cn/2024-08-19/1724043311-315579-20240819125426.png] 如下图自己设置一个没有被占用的端口，然后在GT 里面设置你在LOGGER32里面设置的端口即可日志同步互不影响。

我记得jtdx和n1mm设置里面有配置网络地址的地方似乎是可以用了上传和接收的地方几个软件的设置里面找找？

之前也考虑过这个问题，一个串口只能同时有一个程序使用。玩 FT8 的时候使用 JTDX N1MM 还有 GridTracker，JTDX 可以把日志记录到 N1MM（发送到 n1mm 监听的端口），但 GridTracker 似乎是主动连接 JTDX 开放的端口（而非被动接收数据）。就有一个问题：如果我手动在 N1MM 记录一些日志，如何**自动同步**到 GridTracker？架构是 JTDX 使用串口主叫电台。

JTDX的2237是可以使用组播的，目前我就是利用这个功能，把JTDX、Gridtracker和自己写的一个JTDX监控agent联动，这样GT可以控制JTDX，我的agent也可以接收2237的数据，甚至可以自动向2237发送数据发起CQ.

@"BI1NIZ"#p2705 您这个太先进了👍，是否有平民的操作方式？我现在JTDX只能将日志传给Gridtracke或者logger32，只能二选一。先开了GT，Logger32就收不到日志。先开log，GT就接收不到信息。

Regarding issues related to log collection and device integration, I would like to seek your advice and guidance.

BG5LU

It had been dormant for several years and was no longer keeping up with the times.
Could you please advise on the best ways to aggregate logs from different software and websites?
For software like logger32, JTDX, and N1MM, how can I automatically combine the logs from all of them into a single file? And how can I synchronize these logs with websites such as qrz.com and lotw?
Each software opens, and using TCP connection is one way, but after opening, each software will compete for serial port control, leading to errors. Also, omnirig does not support all of the software.
Manual operations are too cumbersome and time-consuming. I would like to ask my teachers for their recommended solutions. What good solutions are they using?
Thank you for your attention and responses!

YofoaStudio

I remember that in the JTDX and N1MM configuration settings, there was a section for configuring network addresses.
It seems like a place where I can upload and receive files.
Check the settings of a few different software programs.

BG2ELG

We have also considered this issue before: a serial port can only be used by one program at a time.

When using FT8, I use JTDX and GridTracker. JTDX can log data to N1MM (sent to the port listened on by N1MM), but it seems that GridTracker actively connects to the ports opened by JTDX (rather than passively receiving data).

There's one question: If I manually log entries in N1MM, how?Automatic synchronizationAre you referring to GridTracker? Its architecture uses a serial port-based radio for initiating calls.

BI1NIZ

The JTDX 2237 can be used with multicast, and I am currently using this feature to link together JTDX, Gridtracker, and a JTDX monitoring agent that I wrote myself. This allows GT to control JTDX, and my agent can also receive data from the 2237, and even automatically send data to the 2237 to initiate CQ.

BG5LU

BI1NIZ
This is too advanced for me.👍Are there any civilian-friendly operating procedures?
Currently, with JTDX, I can only send logs to either Gridtracke or logger32, but not both. If I start with GT, Logger32 doesn't receive any logs. And if I start with log, GT doesn't receive any information.

BG6RJN

BG5LU LOGGER32 有个端口回传功能

如下图自己设置一个没有被占用的端口，然后在GT 里面设置你在LOGGER32里面设置的端口即可日志同步互不影响。

闽ICP备2021006864号-7

闽公网安备35020602002794号互联网举报中心

用户协议隐私政策社区规范积分规则中继规则转载须知
更新日志联系我们常见问题友情链接运营报告赞助

浩奇科技（厦门）有限公司

是无线电，把我们联系在一起