Version number: V3.08
1. The group call list has been updated to include 32 lists, with each list being able to add 128 group call contacts.
2. The digital transmission end sound can now be set to one of two options.
3. Increase scanning speed appropriately.
4. Add channel reverse switch menu
5. Turn off the green light flashing during scanning.
6. On the menu interface, you can quickly navigate to a specific menu item by entering the corresponding number using the numeric keypad.
7. In FM radio mode, long press.Press the "Up" key to switch to the previous area, and long-press the "#" key to switch to the next area.
8. Fix the issue where the ID reporting fails in digital monitoring mode.
9. Remove system time-related items
10. Fix issues with incorrect SMS formatting settings.
11. Fixes an issue where the radio sometimes doesn't automatically restart after writing.
12. The "dual capacity switch/channel switching/color code switching/DMR encryption switch/jump to receive group call list" customization function has been added.
13. On the DMR channel, the display in the lower right corner indicates whether DMR encryption is enabled (showing "E" for enabled and no indication for disabled).
14. On the DMR channel, a green signal indicator light illuminates.
15. Adjust frequency band switching: Short press the # key to switch between 136-174/400-470 MHz, and long press the # key to switch between all frequencies.
16. Fix the issue where the buttons are unresponsive during frequency measurement.
17. Fix the issue where FM reception settings were not set correctly when entering the NOAA channel.
18. Limit APO time to less than 30 seconds; APO times set to less than 30 seconds are considered invalid.
19. The "Spectrum Decay" setting has been changed to an "SQ" setting. Changing the SQ value allows you to adjust the signal threshold for receiving.
After receiving a signal on the spectrum interface, long-pressing the MENU key allows you to block unwanted signals. Long-press theClear all blocked channels.
Long-pressing the # key switches between scan mode and listen mode. Short-pressing the * key switches between input items.
You can quickly move the cursor by long-pressing ▲▼.
20. Fix the issue where the step setting doesn't work after being repaired for the first time.
21. Add a → instruction for the main PTT to transmit the frequency range (←the frequency range of the last call) after pressing.
22. If an illegal frequency is entered, display a pop-up message and reject the input.
23. When displaying a single frequency, the main PTT transmitter always corresponds to the primary frequency band.
25. Fix the issue where the "Send DTMF" menu setting, when set to disabled, still didn't take effect.
26. Modify the receiving interface; the current receiving interface displays as:
Caller ID: Caller Name<<A (or B)
Caller's name
Caller ID color code
(The first three characters of the calling party ID display the AID, which is the full call contact ID; the group call contact ID, which is the full call/GID; and the single call contact ID, which is the single call.)
26. Fix the issue where the "HD" call hold icon is not working.
27. Fixes the issue where the notification icon for unread messages does not appear when booting up.
闽ICP备2021006864号-7
闽公网安备35020602002794号
互联网举报中心