求购 icom IC-7200 的侧面提手MB-116 最好就是原厂的谢谢 [upl-image-preview url=https://storage.hamcq.cn/2024-10-11/1728631044-321726-ic-7200-mb-116.jpg] [upl-image-preview url=https://storage.hamcq.cn/2024-10-11/1728631057-480990-a4c23298bf204856b3e84566be3d5cc6.webp]

这玩意好像没有见到卖的。要不问问国内大代理？

是这个吗，打印一个就行了 [upl-image-preview url=https://storage.hamcq.cn/2024-10-14/1728869677-463771-20241014093429.jpg]

@"BG5BQB"#p36789 主要没有孔位数据还有一定的工业制图能力

@"wanily0405"#p37285 孔位卡尺测一下的事情，做一个很快，thingverse上有现成的，是给7300/9700用的，我估计和7200孔位应该是一样的，你可以打印一个看看

@"BI4PMQ"#p36482 厂家的最后库存，都背国内的ham 包圆清场了后面我在咸鱼上找到了基本全新的提手谢谢回复

@"BG5BQB"#p37308 嗯，谢谢回复。我后面在咸鱼上买到了

Looking to purchase an MB-116 side handle for the icom IC-7200.

wanily0405

Looking to purchase an MB-116 side handle for the icom IC-7200. Ideally, I would prefer the original factory part. Thank you.

BI4PMQ

I haven't seen this item for sale anywhere. Should I try contacting a major domestic distributor?

wanily0405

BI4PMQ The manufacturer's last remaining stock of "Ham Bao Yuan" products has been cleared out domestically.
Later, I found a nearly new handle on Xianyu.
Thank you for your reply.

BG5BQB

Is this it? Just print one.

wanily0405

BG5BQB The primary issue is a lack of hole data. There is also some industrial drafting capability.

BG5BQB

wanily0405 Regarding measuring with a hole gauge, it's quick to make one. There are existing ones on thingiverse that are designed for 7300/9700, and I estimate they should be similar to the 7200-hole gauge. You can print one out and see if it works.

wanily0405

BG5BQB Okay, thank you for the reply. I later bought it on Xianyu.

闽ICP备2021006864号-7

闽公网安备35020602002794号互联网举报中心

用户协议隐私政策社区规范积分规则中继规则转载须知
更新日志联系我们常见问题友情链接运营报告赞助

浩奇科技（厦门）有限公司

是无线电，把我们联系在一起