之前尝试使用RCForb服务端+Android客户端的方案，不知为啥一直不成功，客户端无法控制电台，也无法发声，网上没找到有价值的参考资料。最近又发现还有一款wfview的开源软件也可以控制，官方网页的文档也有详细的设置说明，但是没有手机端，所以一直没有尝试，有没有成功配置RCForb远程控制的朋友，可以指导下吗？现有物料：电台：IC-7300 计算机：J3160+4G+64G 卡片机：树莓派2B、3B各一块线材：B型数据线 1根

RCFORB还是蛮好用的，我控制过IC7410 IC775 K3S等，电台上能支持remote控制的功能RCFORB全都能控制。电脑远程开关机我用易微联双通道WIFI开关，一个通道设置成开/关模式控制电台供电，一个通道设置成点动模式，连接台式机面板电源开关，模拟人工按下主机电源按钮操作，主板稍微设置一下，可以远程开关电台和电脑。手里没有公网IP，需要zerotier搭建微VN辅助（为此我还专门搭了一个moon服务器，马上要过期了）不过RCFORB具有固有延迟，哪怕你的客户端和服务端都在同一物理内网内，实际都有约0.5秒左右延迟，这个应该是PC声卡处理数据造成的（包括以前用SDR也发现类似延迟）

wfview 更适合705。 7300这种USB链接的。。。。速度不够。。软件上看频谱会很卡很卡。。。从来不研究手机这种。。如果有电脑。ZEROTIER + BA2官方软件多简单

@"BG2EFX"#p33930 想尝试免费方案

@"SuoYuC"#p33934 如果 @"SuoYuC"#p33934 这个回复，没有任何意义

@"ABCDEFG"#p33937 看网上的教程过程都比较简单，不知道是不是哪里设置问题

1.不成功大概率是网络穿透这块有问题，可以尝试用蒲公英打通内网后测试 2.建议你试下官方软件RS-BA1

@"BH7HQT"#p33945 RS-BA1是收费软件吧，好像是要八九百一套。

@"BG2EFX"#p33930 因为7300的是USB虚拟的串口，所以完全跑不到USB2.0标称的480Mbps

@"BG5BQB"#p33947 705也达不到手动狗头~~

How to remotely control an ICOM I3-7300?

BI7ALG

I previously tried using the RCForb server + Android client solution, but it consistently failed. The client couldn't control the radio or transmit audio, and I couldn't find any useful reference materials online. Recently, I discovered that wfview, an open-source software, can also be used for control, and the official website has detailed setup instructions. However, there is no mobile app version, so I haven't tried it yet. Does anyone have experience successfully configuring RCForb remote control? If so, could you please provide guidance?

Available materials:
Radio: IC-7300
Computer: J3160 + 4G + 64G
Camera board: Raspberry Pi 2B and 3B each one
Cable: 1 x B-type data cable

BG2EFX

wfview is better suited for the 705.
Regarding this USB-linked 7300... the speed is too slow. Viewing the spectrum in software results in a very laggy experience...
I've never worked with phones like this before. If I had a computer, using ZEROTIER + BA2 official software would be very simple.

BI7ALG

BG2EFX I would like to try the free option.

BG5BQB

BG2EFX Because the 7300 is a USB virtual serial port, it cannot achieve the 480 Mbps speed specified by USB 2.0.

SuoYuC

Recommend upgrading to the i7-9700.

BI7ALG

SuoYuC If

SuoYuC This reply has no meaning.

ABCDEFG

I ask the same question.

BI7ALG

ABCDEFG The online tutorials seem pretty straightforward, but I'm not sure if there's something I'm missing in the settings.

BH7HQT

1. If it's not working, the problem is likely related to network penetration. Try using "Pugnacious" to access the internal network and then test.
2. We recommend that you try the official software RS-BA1.

BI7ALG

BH7HQT RS-BA1 appears to be a paid software package, likely costing around $800-$900 per set.

BG2EFX

BG5BQB 705 also doesn't reach the level of manual dog head control.

BI4IVE

🤩

BG8AMG

The official software is very useful; for penetration testing, I recommend using ZeroTier. You can find the official software on Taobao (a Chinese e-commerce platform) for a few yuan/RMB.

BI7ALG

BG8AMG It uses FRP + ZeroTier dual data links.

BI7ALG

After searching for information all night, I finally figured it out!

ABCDEFG

BI7ALG Please advise, I'm stuck at the very first step.

BH8AVW

7300 I'm using 3 remote RCForbs, and they are the best.

ABCDEFG

BH8AVW It's so difficult to follow the tutorials.

BG6HXC

BH8AVW 是的加个智能插座随时随地可以在外面打开和关闭家里的电台，想什么时候用就什么时候用。

BI7ALG

BH8AVW 有时候连上去没有声音，或者远程桌面断开后，声音就消失了，是什么原因，RCForb服务端是虚拟机下运行的。

BI7ALG

ABCDEFG What problems have you encountered?

ABCDEFG

BI7ALG 看教程跟我的实际操作完全不一样

闽ICP备2021006864号-7

闽公网安备35020602002794号互联网举报中心

用户协议隐私政策社区规范积分规则中继规则转载须知
更新日志联系我们常见问题友情链接运营报告赞助

浩奇科技（厦门）有限公司

是无线电，把我们联系在一起