WsjtxWatcher v0.1.0 - FT8 communication app for Android（WSJTX/JTDX）Monitoring tools

BG5VLI

不知大家有没有遇到过这种情况：在做2m/6m DX的时候，传播突然打开，但自己完全不知道，等传播过去后才大感可惜；或在玩FT8时突然想上个厕所，但一分钟也不想放过，想知道这段时间通联到了哪些友台...
WsjtxWatcher则给出了一个能够解决这些问题的方案。本软件利用 Wsjtx (或 JTDX，以下均称 wsjtx) 内置的 UDP 服务器功能，实现了与 wsjtx 的数据交互，用户可在软件中查看实时 ft8 信息，并可设置相应提醒，在指定条件下发送通知或振动来提醒您传播打开了或出现了稀有DXCC。您也可以将软件置于后台，正常使用其他应用，甚至在锁屏状态下软件仍可正常为您推送相关信息。
值得注意的是，虽然软件也提供了一些基础交互功能（终止发射、重新解码、清空记录），但这些功能有部分在低版本的wsjtx上不可用或只有部分可用。由于制作软件的初衷是在安卓平台上提供一个简单的 ft8 监控方案，故软件不支持其他复杂功能，例如切换发射周期或更改频段等。如需进行此类操作还需回到 wsjtx 端进行操作，或使用远程桌面。

使用方法

（首先确保运行 wsjtx 的电脑与手机在同一个局域网环境中，例如连接着同一个 wifi!）

点击右上角菜单，选择进入设置页面，在设置页面中填写呼号以及梅登海格坐标，并按需修改其他设置。请记下设置页中展示的 ip 地址和端口号。（务必按照设置界面底部的提醒进行相关操作，否则可能造成信息无法推送！）
回到主界面后，再次点击右上角菜单，点击 “开启服务”。
(如果您未使用 GridTracker 一类的日志软件）在电脑的 jtdx/wsjtx 软件中填写对应的 ip 和端口，如下图所示：

(如果您使用了 GridTracker 一类的日志软件)您需要在日志软件中开启转发功能，在其中填入对应的配置：

等待信息在软件界面中出现！

下载地址

github: https://github.com/SydneyOwl/WsjtxWatcher (欢迎star、issues和PRs！)
蓝奏云：https://wwbk.lanzouq.com/b00uyfak7i 密码：6h7j

欢迎各位友台提出改进意见！

BD8DOK

I hope there's a built-in software update feature. Updating the software can be a bit of a hassle, haha. I don't always keep an eye on the forums, so even after updating, I might not notice immediately. It's great that DXCC is sending reminders now. If I could also specify my own call sign, that would be even better.

BD8DOK

Today, I experienced a crash. The 0.0.1 version did not have this issue. However, the app crashes when services are enabled. DXCC is very useful, and I think the software stability needs to be improved. Also, it would be great if we could explore the possibility of remote monitoring, considering that Wi-Fi range is limited...

BG5VLI

BD8DOK Thank you for your interest! Remote monitoring is feasible, but it requires setting up a server to forward traffic or create a VPN tunnel. I will refine this further if possible. Regarding the crashes, I haven't encountered them yet. They also couldn't be reproduced on both emulators and real devices. Could you please tell me what device and Android version you are using?

BG2EFX

BG5VLI After enabling the Y700 PAD service, it crashed unexpectedly.

BD8DOK

BG5VLI

BG5VLI Android 14, neo6se

BG5VLI

BG2EFX Strange, what version of Android are you using on your tablet?

BG5VLI

BD8DOK
BG2EFX
Please try the 0.1.1 version again. It seems to work in the simulator, and if you're having trouble controlling wsjtx, please check to see if "allow UDP requests" is enabled in the wsjtx settings.