各位友台印卡时建议注意一点：铜板卡250g印制卡片时，一面深色一面浅色容易出现粘色，具体就是白色的一面会有背面图案面颜色的印迹，边缘也会粘上图案面颜色。有条件建议换白卡/白滑影，或者覆膜后用记号笔书写。[upl-image-preview url=https://storage.hamcq.cn/2024-09-03/1725375099-2483-img-20240903-223934.jpg] [upl-image-preview url=https://storage.hamcq.cn/2024-09-03/1725375107-396156-img-20240903-223855.jpg]

啊？这个锅，印刷方不接？

@"BG5CYY"#p32047 肯定是印刷方的问题啊，印完需要放的久一点，或者印刷厂自己找速干的油墨和铜版纸啊

这个油墨没干就收起来了

估计是印刷问题，我的卡正面大面积黑色，也没沾上

@"Miles"#p32053 接了，人家说切太快导致沾墨，明天补发

@"BG5CYY"#p32245 那这个卖家还算讲道理——这个锅绝对不可能顾客自己来接。

提醒：卡片正面~~也就是写信息的那面~~，不要刷光油！不要刷光油！不要刷光油！（原因：刷了光油之后普通中性笔写不了字，只能用油性记号笔写，，光敏印油也需要长时间的晾干，）

卡片风景页覆膜会不会好些？

@"BH3XZT"#p32281 我就踩过这坑，还做的明信片，邮戳都打不上去，后面只好套信封寄了

@"BG5CYY"#p32047 求个模板，感觉很好看

Important considerations regarding QSL card printing.

BG5CYY

各位友台印卡时建议注意一点：
铜板卡250g印制卡片时，一面深色一面浅色容易出现粘色，具体就是白色的一面会有背面图案面颜色的印迹，边缘也会粘上图案面颜色。
有条件建议换白卡/白滑影，或者覆膜后用记号笔书写。

BD7PPD-xiaohei-lv

BG5CYY It must be a problem with the printing company. They need to let the print dry for longer, or they could use fast-drying ink and copperplate paper.

BG2GGH

BG5CYY I'm looking for a template; I think it looks really good.

BD4MCG

BG5CYY If possible, I recommend replacing the white card with a white envelope or using a clear envelope and writing on it with a marker.

It can be coated on one side. It's non-stick and doesn't affect writing.

Miles

Um? So, the printing company isn't involved in this?

BG5CYY

Miles Received. They said that cutting too quickly caused ink to smear, and they will resend it tomorrow.

BH9FPK

I put this ink away immediately because it hadn't dried yet.

BI4PMQ

It seems to be a printing issue; my card has large areas of black ink on it, and it hasn't been damaged.

Miles

BG5CYY That seller was reasonable – they would never expect the customer to handle that themselves.

BH3XZT

Reminder: The front of the card~~That refers to the side where information is written.~~Don't use gloss varnish! Don't use gloss varnish! Don't use gloss varnish! (Reason: After applying gloss varnish, ordinary neutral pens cannot write, only oil-based markers can be used. Gloss inks also require a long drying time.)

BG5VLI

BH3XZT I even tried sending a postcard through that mailbox, but I couldn't even get the postage to stick on. So, I ended up putting it in an envelope and mailing it that way.

BI3TKL

BH3XZT 这哥们是亲身经历的，他给我的卡就是刷了光油拿记号笔写的

YofoaStudio

Would applying a protective film to the card's scenic page be better?

BG5CYY

BG2GGH We will consider making it public later.

BH8GG

BG2GGH 🤔他这样式你照着做一个就可以了吧。。应该

Bi4KKF

It's not recommended to apply a protective film; it will actually make it worse.
You can choose either matte or white card stock; 300g is quite thick.
Most likely, the user cut and packaged the edges before the ink had dried.