试着用闲置的surface架一个小igate，又不太想刷linux，搜了半天windows环境的架设找到direwolf和pinpoint的组合，但是在用k6测试的时候发现pinpoint接收报文会出现乱码导致上传网关失败，请问有人碰到这种情况吗，是否有解决办法？ [upl-image-preview url=https://storage.hamcq.cn/2024-08-09/1723164530-428521-vj-01rxj7hr5cc.png] 感激不尽

@"BG2MEK"#p27965 我的还好 1米的苗子在窗边都能收到15KM以外的信标。。但是吧 V段这个东西在市区你没高度白扯的

在用pinpoint，但没架igate

捡垃圾的盒子+垃圾SDR direwolf组igate路过。。。成本不超过100

@"BG2EFX"#p27745 请问您搭的效果怎么样？我这边改用APRSISCE搭起来了，但是解码效果比较差，感觉是sdr接收的问题

@"BG2MEK"#p27920 校准频偏了么？

@"BG2EFX"#p27956 校准了，用的一根1m2拉杆天线，接收比较弱

@"BG2EFX"#p27967 可能确实是高度问题，才3层楼。。。

@"BG2MEK"#p28017 那肯定不行我市区的主网关30层。家里这个还有23层

Has anyone used the Pinpoint system for installing a satellite?

BG2MEK

I'm trying to set up a Windows environment using a spare Surface rack and a small iGate, but I don't really want to use Linux. After searching for a while, I found that the combination of Direwolf and Pinpoint works, but when testing with k6, I discovered that Pinpoint receives messages in an incorrect format, which causes the upload to fail. Has anyone encountered this issue before? Are there any solutions?

I am deeply grateful.

BH2XIY

I'm using pinpoint, but I haven't set it up to track.

BG2EFX

A box for collecting trash + a trash SDR direwolf group passing by... Cost less than $100.

BG2MEK

BG2EFX How is your setup working out? I've been using APRSISCE to set mine up, but the decoding performance isn't very good. I suspect it might be an issue with the SDR receiver.

BG2EFX

BG2MEK Have you calibrated the frequency offset?

BG2MEK

BG2EFX Calibrated; using a 1 m² pull-out antenna, reception is quite weak.

BG2EFX

BG2MEK 我的还好 1米的苗子在窗边都能收到15KM以外的信标。。但是吧 V段这个东西在市区你没高度白扯的

BG2MEK

BG2EFX It might actually be a very serious issue, considering it's only three stories high...

BG2EFX

BG2MEK That definitely won't work. My main gateway at home is on the 30th floor. This one here is only on the 23rd.

闽ICP备2021006864号-7

闽公网安备35020602002794号互联网举报中心

用户协议隐私政策社区规范积分规则中继规则转载须知
更新日志联系我们常见问题友情链接运营报告赞助

浩奇科技（厦门）有限公司

是无线电，把我们联系在一起