GVZ Is it possible to turn the UVK6 into a "full-band receiver" by installing an Si4732 chip and flashing it with the shortwave firmware, and also prevent it from transmitting in the UV band?
BI7ANZ GVZ After installation, the UV segment can operate normally. You need to flash the firmware that supports SI4732.
BA7NXV My understanding is that adding the SI4732 allows for shortwave reception, but the K6 hardware design does not support shortwave, so it's acceptable, although the results may not be optimal.
BG3ILS Support UV only by installing module 4732. Receive shortwave communication through module installation.
GVZ Sharkbia Is the radio chip I disassembled the one that originally received the 88-108 MHz frequency band?
GVZ Sharkbia I just checked, and the SI4732 supports AM (530 kHz to 1710 kHz), FM (64 MHz to 108 MHz), and shortwave (2.3 MHz to 26.1 MHz) reception bands. The problem is solved! Thank you.
闽ICP备2021006864号-7
闽公网安备35020602002794号
互联网举报中心