FT710 firmware issues

BH5HFK

我手里这台FT-710短波电台，在使用N1MM软件控制自动发射时，在电台默认设置时（语音自动识别），发现N1MM软件的语音信号无法发送到电台内！如果把设置改为USB模式是可以把N1MM的语音送到电台内地，但是这个时候又发现手咪就失灵了！
N1MM是业余无线电常用的控制软件，在比赛中常用，比如自动语音发射功能，它还可以同时记录日志，非常方便！如果电台不支持太可惜了！
数传FT8模式却正常！
我采用了一根USB线，把电脑电台连接在一起!
希望八重洲电子的工程师更新一下FT-710的固件，支持N1MM的语音可以通过FT-710虚拟声卡送到电台内！
不知道各位ham你们有遇到此类问题吗？

BG6HFD

The FTDX10 situation I'm experiencing seems similar. The actual testing results are as follows: Only audio transmitted via USB trigger PTT can be received on the computer. However, no matter how I configure it, manually pressing the microphone's PTT button only receives audio from the microphone and does not accept audio from the computer.

BH5HFK

I hope that anyone else experiencing similar issues will also email Yaesu to report it! Please update the firmware to resolve this problem.

BH5HFK

I hope that all users experiencing similar problems will also email Yaesu to report this! Please update the firmware to resolve these issues quickly!

BG7DKN

I'm not sure I fully understand what you mean.
I specifically tested it in the evening, and I didn't have any problems. I was able to click on N1MM to send the pre-recorded voice, and PTT also worked as expected (see picture).

BG9JDI

Please ensure that the configuration matches mine, and that the audio sampling rate is 44.1 kHz.

BH5HFK

BG9JDI Could you take a look at how your radio is set up? I've tried setting mine up according to your instructions, but it still doesn't work. Maybe the radio isn't configured correctly!

BG9JDI

BH5HFK It seems that all the radios have default settings. I'll check it at home for you. With the default settings, the audio triggered by CAT can only go into the radio through a virtual sound card. The handheld microphone is useless in this case. Conversely, the audio triggered by the handheld microphone can only be input through the handheld microphone. The radio should not have any problems. I used the same method with the ARRL 10m band a few months ago.

BG9JDI

You must trigger PTT (using either "cat" or another method) through n1mm, and then set all internal settings to their defaults.

闽ICP备2021006864号-7

闽公网安备35020602002794号互联网举报中心

用户协议隐私政策社区规范积分规则中继规则转载须知
更新日志联系我们常见问题友情链接运营报告赞助

浩奇科技（厦门）有限公司

是无线电，把我们联系在一起