BD8BVV After using QuanSheng UV-K6 with LOSEHU129, I was unable to restore the original firmware. Additionally, after restoring the firmware, it continues to report low battery. What is going on?
BI1UHW BD8BVV I suspect that the battery voltage may not have been calibrated after you finished charging, so I recommend using a multimeter to measure the battery voltage and then correcting it in the settings if necessary.
BG2FAS BD8BVV What version of K6 are you using? Are you trying to flash back to the original firmware that you downloaded from the official website? If so, is it possible that your device was purchased through an overseas trading department (K6)?
YAOQI If flashing the official firmware results in an error indicating that the hardware version number is incorrect, it means you have an export-oriented machine. Don't worry, you can still use the LOSEHU129 firmware.
z1579762 Have you resolved this issue? I purchased the international version and experienced the same problem immediately after using it.
BD8BVV [已注销] Currently, it has been resolved, but the sensitivity is particularly strange; it only feels very low and very high.
KevinChen BD8BVV Has the calibration file been reflashed? Besides the firmware, the calibration file and sensitivity also play a role.
z1579762 KevinChen What should I do if the calibration file has not been backed up and a flashing operation is performed?
闽ICP备2021006864号-7
闽公网安备35020602002794号
互联网举报中心