想找个尺寸小一点的，常见的电源似乎都是86mm，稍微宽了点。发现一些HP Gen9系列的电源貌似宽度比较小，但是不知道这些比较新的电源会不会比较难改（看起来这些新电源似乎具有IPMI管控的功能）如果不太好搞的话，外置升压模块有搞头吗？

那就看看DELL的，应该不到80mm，电压可不用改，12V也可直接用，13.8正负20%内

@"BloodBlade"#p21775 宽了点？立起来用

@"BG7PUW"#p22537 感谢，去找找看看。 @"BG2EFX"#p22547 主要是想放在一个正方形的格子里，立起来高度也超了。

@"BloodBlade"#p22554 不太建议在你说的这种空间用建议考虑散热~

Are there any server power supplies with a width less than 80mm that are also easy to modify?

BloodBlade

I'm looking for a smaller size; most common power supplies seem to be 86mm wide, which is a bit too large.

I've noticed that some HP Gen9 series power supplies seem to be quite narrow in width, but I'm not sure if these newer models will be more difficult to modify (it seems like these new power supplies have IPMI control functionality).

If it's proving difficult to implement, could an external voltage booster module be a solution?

BG2EFX

BloodBlade Wider? Use it upright.

BG7PUW

Let's look at the DELL ones; they should be less than 80mm, and you shouldn't need to change the voltage; 12V can be used directly. The tolerance is ±20% for 13.8V.

BloodBlade

BG7PUW Thank you, I will look into it.

BG2EFX The main reason was that I wanted to place it in a square frame, and its height would also exceed the frame's dimensions.

BG2EFX

BloodBlade I don't recommend using this type of space as you suggested. I suggest considering cooling instead.

闽ICP备2021006864号-7

闽公网安备35020602002794号互联网举报中心

用户协议隐私政策社区规范积分规则中继规则转载须知
更新日志联系我们常见问题友情链接运营报告赞助

浩奇科技（厦门）有限公司

是无线电，把我们联系在一起