新人报道，咨询下，泉盛uvk6绿色扩容版想写中文信道，刷字库，是不是必须先升级第三方固件，才能刷字库，写中文信道？

是的，我是去https://k5.vicicode.com/#/tool/flash刷好固件然后写入中文字库就可以写入中文信道名了

@"[未知用户]"#p20578 谢！

> @"STR1"#p20576 泉盛 uvk6 绿色扩容版原厂到手就是losehu 1.26H，不用刷字库了呀

@"BA4QDP"#p20598 啊，我到没看，不知道怎么查看固件。

@"BA4QDP"#p20598 原厂正常不会刷成第三方给用户，可能是卖家代刷过之类的

@"STR1"#p20601 不太清楚官方固件怎么查看版本信息。我是直接买的刷好losehu固件的机器。如果是losehu固件的话，可以先去菜单里（大概第20多项）把开机信息设置成文字信息。这样下次开机的时候屏幕就会显示固件信息了，能持续大概几秒钟，之后就进入正常手台操作界面了。

我买的是原厂的（京东自营厂家发货），固件是3.00.18

QuanSheng UVK6 Green Expansion Version Font Library Issue

STR1

New users, please ask: Regarding the QuanSheng UVK6 green expansion version, is it necessary to upgrade the third-party firmware before being able to write Chinese characters and create a Chinese channel?

BA4QDP

STR1 QuanSheng UVK6 Green Expansion Version

The original factory version is already losehu 1.26H, so there's no need to update the database.

BA7OGM

Yes, I flashed the firmware using https://k5.vicicode.com/#/tool/flash and then wrote the Chinese language pack, which allows me to write Chinese channel names.

STR1

BA7OGM Thank you!

STR1

Syryia Thank you.

STR1

BA4QDP Oh, I haven't seen it yet. I don't know how to check the firmware.

troilus

BA4QDP The original factory settings should not automatically switch to a third-party service for users. This could be due to the seller having performed some kind of manual configuration.

ppyyf

STR1

I'm not sure how to check the version information for the official firmware.
I bought the machine directly from Losehu, which sells the "Shua Hao" firmware.
If you're using the "losehu" firmware, you can first go to the menu (around item number 20 or so) and set the boot information to text.
As a result, when you power on the device next time, the firmware information will be displayed on the screen for approximately a few seconds before transitioning to the normal control interface.

DF4_9460

ppyyf You can use the "QuanSheng Simulator Handset CPS" (official K6 write-frequency program) to check the firmware version, or you can check it on the K5Web website.

sahaa2024

I purchased the original version (shipped directly from the manufacturer through JD), and the firmware is 3.00.18.

lixiaosi

sahaa2024 The UVK6 "Teen Green" version I just purchased also has firmware version 3.00.18.

ppyyf

DF4_9460

Received, I have learned. 🙏
I was just thinking that not all users have a frequency line. If you don't have a frequency line, you can only see the information by turning on the machine.

lixiaosi

Syryia
Can the firmware from Lion Tiger, CEC, and IJV all be used to install Chinese language packs and enable Chinese input methods?

BG2EFX

lixiaosi CEC and IJV are foreign-language terms; how could they be in Chinese?
This is exclusive to LH.

wp558158

After flashing the firmware on the k6, both the character library and pinyin search are working. However, one "dao" character is not appearing. Also, the pinyin for "D" is not showing up. What's going on?

BA4QAO

The screws and hardware must be of high quality. I have been using them and they are very good.

闽ICP备2021006864号-7

闽公网安备35020602002794号互联网举报中心

用户协议隐私政策社区规范积分规则中继规则转载须知
更新日志联系我们常见问题友情链接运营报告赞助

浩奇科技（厦门）有限公司

是无线电，把我们联系在一起