新规落地以来湖北跟进得还不错，先是可以100瓦承诺不超过15瓦发射上小执照，现在老机器也可以通过验机上执照 [upl-image-preview url=https://storage.hamcq.cn/2024-06-07/1717737252-741616-image.png]

自制电台上照流程问题不大，没有核准码的品牌老电台上执照按什么流程上照，具体操作方案，愿闻其详。

@"BH7JUO"#p19880 应该跟自制的流程差不多，具体流程还是咨询省无线电管理处。湖北省无线电监测中心有验机资质，可以出具验机报告，法规也是要求无线电管理机构应当对该设备是否符合本办法第七条第三项规定的条件进行技术检测。 > 第十四条设置、使用业余无线电台拟使用自制、改装、拼装**等未取得型号核准的无线电发射设备**的，无线电管理机构应当对该设备是否符合本办法第七条第三项规定的条件进行技术检测。 > 无线电管理机构开展技术检测，不得收取任何费用。 > 使用自制、改装、拼装**等**未取得型号核准的无线电发射设备的，提交该设备符合本办法第七条第三项规定条件的说明材料。即： > 使用的自制、改装、拼装**等**未取得型号核准的无线电发射设备符合国家标准和国家无线电管理规定，且无线电发射频率范围仅限于业余业务频段。

没错，我IC718小本已经下来了，给湖北经信厅点赞，送锦旗：）

省监测中心资质是续上了还是怎么说

@"SuoYuC"#p19895 今天BH6QAS验机时拍的 [upl-image-preview url=https://storage.hamcq.cn/2024-06-07/1717753162-88163-3g0cfvw0mnjib4nk84.jpg]

@"BG6QED"#p19897 好好好四月份问还说没资质呢，不过不是一个系统的不太清楚情况也正常

Good news: old equipment in Hubei can now obtain licenses for use on-site.

BG6QED

Since the new regulations have been implemented, Hubei has done a good job following up. Initially, they could promise to emit no more than 15 watts and obtain a small license, and now even older machines can obtain a license after passing inspection.

BH7JUO

Regarding self-made radio stations, I don't have any specific questions. However, for established brands that do not have a verified code, what is the process for obtaining a license? Please provide detailed operating procedures.

BG6QED

BH7JUO
It should be similar to the process we developed internally. For specific details, please consult with the provincial radio management office.
The Wireless Monitoring Center in Hubei Province has the necessary qualifications and can issue test reports. The regulations also require that radio management agencies must conduct technical testing to ensure that the equipment complies with the requirements specified in Article 7, Paragraph 3 of this regulation.

Article 14: Regarding the establishment and use of amateur radio stations, it stipulates that they will be constructed, modified, or assembled using self-made components.For radio transmitting equipment that has not yet obtained type approval.The relevant radio management agency should conduct technical testing to determine whether the device complies with the requirements specified in Article 7, Paragraph 3 of this regulation.
Radio management agencies conduct technical inspections and are not allowed to charge any fees.

Using homemade, modified, or assembled parts.WaitingFor wireless radio transmission equipment that has not obtained type approval, submit a statement of compliance with the requirements specified in Article 7(3) of this regulation.

That is:

Using homemade, modified, and assembled parts.WaitingUnlicensed radio transmitting equipment that has not been approved by the manufacturer is in compliance with national standards and regulations for national radio management, and its operating frequency range is limited to amateur business bands only.

BG6QFO

Yes, my IC718 small book has arrived, and I want to thank the Hubei Department of Economy and Information Technology. Here's a thank-you banner: )

SuoYuC

The provincial monitoring center's accreditation status – whether it was renewed or something else –

BG6QED

SuoYuC Photos taken during BH6QAS testing today.

SuoYuC

BG6QED Okay, so in April, I was told that the four [unspecified] were still not qualified, but this wasn't necessarily a problem because they weren't part of a formal system. It makes sense given the circumstances.

闽ICP备2021006864号-7

闽公网安备35020602002794号互联网举报中心

用户协议隐私政策社区规范积分规则中继规则转载须知
更新日志联系我们常见问题友情链接运营报告赞助

浩奇科技（厦门）有限公司

是无线电，把我们联系在一起